[Z06] Mod/Build Planning
Thread Starter
Heel & Toe
Joined: Apr 2014
Posts: 18
Likes: 0
From: Cle OH
Mod/Build Planning
Hey guys just bought my Z06 a month a go. Told myself that I was gunna leave it stock for awhile....then my 2nd gear syncro went out and now its gotta go under the knife to get the trans sent off and built. Figured why not just start now then. Here are my plans so far:
Tick stage 2 rebuild on the trans
LS7 clutch/flywheel or McLeod rst/rxt
Stainlessworks 1 7/8th Headers offroad xpipe
TEA Stage 2 ported 243 heads
Vararam intake
Now here's where I don't know what I want to do with a cam. I don't want to lose any drivabitly of the car, but I do want a lope and the extra power.
Any Ideas?
Tick stage 2 rebuild on the trans
LS7 clutch/flywheel or McLeod rst/rxt
Stainlessworks 1 7/8th Headers offroad xpipe
TEA Stage 2 ported 243 heads
Vararam intake
Now here's where I don't know what I want to do with a cam. I don't want to lose any drivabitly of the car, but I do want a lope and the extra power.
Any Ideas?
