Removing and installing EBCM
Thread Starter
Racer
Joined: May 2005
Posts: 306
Likes: 5
From: New Orleans Louisiana
Removing and installing EBCM
I recently removed the EBCM on my 2001 Vert due to the C1214 error code so I could send it out to be repaired. This is the 2nd time removing and installing it using both the "over the top" and the "under the car" modes. I can report that you'll save yourself a huge amount of work, time and frustration by using the "under the car" mode. Taking a few minutes to run it up onto your ramps or jack stands is definitely the way to go. I guarantee your back will thank you, not to mention your patience, after dropping the screws over and over into those inaccessible hiding places down there when trying to install it from above.
Administrator
Joined: Mar 2001
Posts: 368,340
Likes: 24,779
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
And hopefully you won't have to do it again.
Le Mans Master
Joined: Sep 2013
Posts: 8,900
Likes: 1,074
From: Wisconsin
I recently removed the EBCM on my 2001 Vert due to the C1214 error code so I could send it out to be repaired. This is the 2nd time removing and installing it using both the "over the top" and the "under the car" modes. I can report that you'll save yourself a huge amount of work, time and frustration by using the "under the car" mode. Taking a few minutes to run it up onto your ramps or jack stands is definitely the way to go. I guarantee your back will thank you, not to mention your patience, after dropping the screws over and over into those inaccessible hiding places down there when trying to install it from above.
Thread Starter
Racer
Joined: May 2005
Posts: 306
Likes: 5
From: New Orleans Louisiana
I sent the EBCM off to Mandigital on eBay to be repaired for $50 and it came back in record time. I installed it and it works perfectly...No codes whatsoever!
Last edited by NOLAVette; Sep 16, 2014 at 08:14 PM.
