[Z06] Need help with Z06 wheel stud length
Thread Starter
Burning Brakes
Joined: Nov 2000
Posts: 824
Likes: 0
Need help with Z06 wheel stud length
My Z06 is in a storage building several states away. If it's convenient for someone to pull a wheel, I need to know the length of the exposed wheel stud from the outer rotor hat to the first thread (not the end of the stud, which is bare for approx. 1/4")
TIA,
Mark
TIA,
Mark
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: Need help with Z06 wheel stud length (TeamZ06)
TeamZ06,
I just happen to have the two front wheels off my Z06. (Cleaning the wheel wells and the back side of the wheels.
I'll email this info this afternoon around 5:30 or 6:00pm if nobody has sent it to you by then,
I just happen to have the two front wheels off my Z06. (Cleaning the wheel wells and the back side of the wheels.
I'll email this info this afternoon around 5:30 or 6:00pm if nobody has sent it to you by then,
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: Need help with Z06 wheel stud length (TeamZ06)
I hope this is not too late.
The THREADED part is EXACTLY 7/8".
The unthreaded part is exactly as you said: 1/4"
Sorry, I just came in from my garage. I've been Zainoing all afternoon.
The THREADED part is EXACTLY 7/8".
The unthreaded part is exactly as you said: 1/4"
Sorry, I just came in from my garage. I've been Zainoing all afternoon.
