Help locating a thread please.
Thread Starter
Racer
Joined: May 2011
Posts: 254
Likes: 1
From: White Bear Lake Minnesota
Help locating a thread please.
Hey guys I've been searching for a couple days and tried commenting on another thread about this topic with no luck...
I found a thread last summer I believe about lowering the C5 on stock bolts. It had detailed instructions with detailed pictures. The thread might of even linked you to another website with the pics and info (I cant remember)
Anyways I'm thinking about lowering my Vette this weekend since it is nice out and I have the time. I just wanted to look over that thread before I dug into it. I could of swore it was in a sticky somewhere but cant seem to find it...
Any help would be appreciated! Thanks!
I found a thread last summer I believe about lowering the C5 on stock bolts. It had detailed instructions with detailed pictures. The thread might of even linked you to another website with the pics and info (I cant remember)
Anyways I'm thinking about lowering my Vette this weekend since it is nice out and I have the time. I just wanted to look over that thread before I dug into it. I could of swore it was in a sticky somewhere but cant seem to find it...
Any help would be appreciated! Thanks!
Last edited by Vette10R; Apr 16, 2016 at 12:41 PM.
Racer
Joined: Jun 2015
Posts: 405
Likes: 65
From: Rural Iowa
This one?
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
Burning Brakes
Joined: May 2013
Posts: 1,249
Likes: 142
From: Lynn MA
This one?
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
.
Joined: Apr 2013
Posts: 5,022
Likes: 1,150
From: Oregon
St. Jude Donor '14-'15-'16-'17-'18-'19-'20-'21-'22-'23
Thread Starter
Racer
Joined: May 2011
Posts: 254
Likes: 1
From: White Bear Lake Minnesota
This one?
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
http://www.frankhunt.com/FRANK/hobbi...5_Lowering.htm
It's the page I used when I raised the rear on mine. BE SURE TO MARK YOUR BOLT POSITIONS BEFORE STARTING.
Jim
Jim
Thank you I have been searching for hours!! Haha
