When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
*** FS: Urethane C5 Diffusers - No Drilling Required ***
Well, its FINALLY happened!! We are happy to unveil our new diffusers for the C5 Corvette. It's been years in the making as most of you know and after countless broken promises from a previous manufacturer, we finally got these finished.
These are made out of urethane, so what that means is it's flexible to an extent and will NOT crack or chip if you happen to kick up some rocks, or hit road debris etc. Mounting is very simple, there are four tabs on the back side, those you slide into the rear vents on the bumper and that will guide it into place. Once it's somewhat lined up you can adjust it as needed. You may also want to use a soapy solution and spray the rear bumper to give you a few seconds to move the diffuser around before the tape gets tacky. It's as simple as tightening down the nuts, then doing the same on the lower fin that goes under the fender. There are also 4 tabs that bolt on using your existing bolts above your exhaust. You'll see once it's in your hands, it's very straight forward, no need to pay someone to install it for you. It will include the hardware you need to mount it, which will be some washers and nuts (inserts are molded into it already) We don't provide the double sided tape that is recommended, but I'll post an email address to a guy that I have sent a lot of customer to, he has great prices and ships fast.
Here's his email addressjwilson4940@gmail.com just tell him you need 3M VHB and the length you want (also tell him Pete sent you). I would think 6 feet should be enough.
I made sure manufacturing knew that these had to fit really well, and he said they nailed it. They have a C5 rear clip, as you'll see in the pictures at their facility that they used for mock up and test fitting. I'm confident that you guys will be very pleased with these. A lot of work by a lot of people have gone into this. Special thanks to Rob (Stealth02) for his work in getting the prototype made and sent to us, for that we are calling it the Stealth C5 diffuser.
Pricing is as follows:
$559 + 79 shipping anywhere in the lower 48 states, please pm me if you need shipping internationally or to Canada.
These will start shipping by Tuesday or Wednesday of next week, no more waiting, no more lists, nothing! I appreciate all the patience and I will be providing more pictures as well as soon as I get them
WOW...if those really fit like the picture and video I am definitely ordering one!
Well freakin done!
Lol, they do! This was the second one pulled from The mold. They did their trimming etc then got me pics and the video.
Originally Posted by doublec4
It's happened!! It's finally happened!!! I'll be waiting for carbon but it's finally being offered! Thanks for seeing this through!
Thank you sir! I don't have an ETA on carbon, I know manufacturing has a huge project coming up but I'll try to see if he can give me a ballpark timeframe.
I have been waiting for almost a year and now its real. I ordered mine this past weekend and I am looking forward to having it on the car for this summer. I will post pictures as soon as I get it on the car.
Hey guys! Long story short, pricing has been adjusted. We originally thought pricing was going to be higher, and I've confirmed its $559 plus shipping, we can't go any lower than that.
I will be pm'ing the guys that ordered when I get a minute.
This is even more of an incentive to buy, you're getting a great fitting urethane part for under $650 shipped!!
Hey guys! Long story short, pricing has been adjusted. We originally thought pricing was going to be higher, and I've confirmed its $559 plus shipping, we can't go any lower than that.
I will be pm'ing the guys that ordered when I get a minute.
This is even more of an incentive to buy, you're getting a great fitting urethane part for under $650 shipped!!
Will the carbon version be as pliable and well fitting as the urethane version?
No, the carbon ones will be rigid but they should fit just as good. Not sure when we can get them made though.
-----------------------------
For the first few orders, you guys should all have tracking. Guys that ordered yesterday I should have tracking today. Thanks guys, can't wait to see a few of these installed.
*** FS: Urethane C5 Diffusers - No Drilling Required ***
