Loose drivers side window
Thread Starter
Melting Slicks
Joined: Sep 2013
Posts: 2,264
Likes: 455
From: Stella, North Carolina
Loose drivers side window
My drivers side window rattles and moves easily when all the way up. I searched and found a fix but the thread is locked. My question is does anyone have pics of the area where the felt goes to tighten this up? The link is for the locked thread...https://www.corvetteforum.com/forums...e-windows.html
Thanks...
Thanks...
Drifting
Joined: May 2007
Posts: 1,547
Likes: 210
From: Huntersville, NC
loose window.
My drivers side window rattles and moves easily when all the way up. I searched and found a fix but the thread is locked. My question is does anyone have pics of the area where the felt goes to tighten this up? The link is for the locked thread...https://www.corvetteforum.com/forums...e-windows.html
Thanks...
Thanks...
Last edited by k24556; Sep 18, 2016 at 09:55 AM. Reason: more info
Drifting
Joined: May 2007
Posts: 1,547
Likes: 210
From: Huntersville, NC
update with photo
My drivers side window had a bad leak and a bad rattle. I found the bracket that the forward adjuster uses to set the front track had broken away from the door panel. It was held with two pop rivets that were broken in a small disagreement I had with a tire wall at the track. I thought I had re-pop riveted it, but I found I used two stainless #14 round head sheet metal screws that were stainless steel. Pic below. the rectangular plastic plug is removed to reveal the track adjuster. Been several years ago this happened, but all is good, no rattles, no leaks.
