RadioFlyer
Thread Starter
Burning Brakes
Joined: Oct 2014
Posts: 1,211
Likes: 60
From: Artesia NM
RadioFlyer
Anyone have any suggestions on contacting the vendor RadioFlyer? I bought a set of the Bi-Xenon headlights and one of the low beam bulbs went out after only a few hours of use. I've tried to email from here on the forum and also went to their web site and tried contacting them from there. I've gotten no response.
Drifting
Joined: Aug 2014
Posts: 1,402
Likes: 394
From: Virginia
St. Jude Donor '18
Thread Starter
Burning Brakes
Joined: Oct 2014
Posts: 1,211
Likes: 60
From: Artesia NM
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Jun 2004
Posts: 2,836
Likes: 110
From: El Paso TX.
Anyone have any suggestions on contacting the vendor RadioFlyer? I bought a set of the Bi-Xenon headlights and one of the low beam bulbs went out after only a few hours of use. I've tried to email from here on the forum and also went to their web site and tried contacting them from there. I've gotten no response.
Supporting Vendor
Joined: Jul 2010
Posts: 8,550
Likes: 903
From: Republic of Texas
Supporting Vendor
Joined: Jul 2010
Posts: 8,550
Likes: 903
From: Republic of Texas
radioflyer97@gmail.com
Include your order number (if known) and a photo of the bulb as well as your current shipping address. We'll get you taken care of.
Pro
Joined: Feb 2004
Posts: 737
Likes: 52
From: Las Vegas NV
I just installed my new lights in my C5 Z06 today. I had a couple of questions so I called George, once in the morning. He answered the phone and helped me through the problem I was having which was my fault. I then called him again in the afternoon, but missed him, but he called me back within half an hour. Turns out I downloaded the wrong instructions. George immediately emailed me the right one. He was extremely nice and very helpful. Thankyou George I appreciate your help and love my new lights! 
Just need to get them aimed tonight.
Just need to get them aimed tonight.
Thread Starter
Burning Brakes
Joined: Oct 2014
Posts: 1,211
Likes: 60
From: Artesia NM
My wire was coming loose inside the black connector. I had an issue when I first installed where one of the wire connectors was crimped on the iwire insulation and not making contact with the wire.