Someone help please!!!
Thread Starter
Advanced
Joined: Jan 2013
Posts: 82
Likes: 0
From: McDonough Georgia
Someone help please!!!
I just did an engine swap on my 2002 C5. Went to a cast iron 5.3L block bored and stroked to 383CI. Some of the ground wire locations on the block are different. Now the starter is just clicking. Took it off and it tested good battery is new. Help 
Team Owner
Joined: Jul 2006
Posts: 22,502
Likes: 471
From: Douglas County WI
Side post battery? This may sound too simple, but check to make the cables are tight and not cross-threaded. I carry a 5/16 wrench in car because this has happened to me more than once. Good luck
Thread Starter
Advanced
Joined: Jan 2013
Posts: 82
Likes: 0
From: McDonough Georgia
That pic helped out tremendously. The starter is working now. The car still won't start. I think I might have an issue with the 2 grounds on the driver's side of the block. Do you happen to have photos of those grounds too?
1/4 mile/AutoX
Joined: Jun 2014
Posts: 11,439
Likes: 2,183
From: Buffalo Texas
no sorry, but they mount in a similar spot on the drivers side.
