New steering wheel on the way! Install myself or let the bowtie boys do it???
#21
Safety Car
Quick update. Did the wheel myself without any issues so far!
I pulled the bag off last night, removed the nut, soaked it in PB Blaster. Then I used a wheel puller with the j-hooks. Applied pressure and let it sit overnight.
This morning I sprayed it with PB again and gave it about an 1/8 of a turn, sprayed it again.
After lunch I tried it. Just about a 1/4 turn and it popped. Just about scared the $hit out of me when it did.
Biggest pain for me were the two screws on the back of the airbag!!
"383 ZO6" was spot on. Spray it and be patient.
Should have the new one on later and I'll post a few pics.
I pulled the bag off last night, removed the nut, soaked it in PB Blaster. Then I used a wheel puller with the j-hooks. Applied pressure and let it sit overnight.
This morning I sprayed it with PB again and gave it about an 1/8 of a turn, sprayed it again.
After lunch I tried it. Just about a 1/4 turn and it popped. Just about scared the $hit out of me when it did.
Biggest pain for me were the two screws on the back of the airbag!!
"383 ZO6" was spot on. Spray it and be patient.
Should have the new one on later and I'll post a few pics.
The following users liked this post:
Jeff T. (04-27-2017)