***Radioflyer's "Luminator" Low-Rise Headlight Pre-Sale GP***
#81
Supporting Vendor
Thread Starter
Update: Installed the first production kit on Saturday to take pictures for the install guide. A few minor quirks were found that required some changes to make it easier for the average Joe, but overall everything went rather smoothly.
Among the changes are a different washer thickness combination on the lifting arm mechanism. The new assembly is now rock solid and turns like it's on bearings.
The shrouds have also arrived and have a bit of a rough finish. I'm going to smooth out some of the imperfections prior to shipment.
I anticipate the first kits will be going out Thursday and remaining kits on Friday.
Test shots from the first installation:
Among the changes are a different washer thickness combination on the lifting arm mechanism. The new assembly is now rock solid and turns like it's on bearings.
The shrouds have also arrived and have a bit of a rough finish. I'm going to smooth out some of the imperfections prior to shipment.
I anticipate the first kits will be going out Thursday and remaining kits on Friday.
Test shots from the first installation:
The following 2 users liked this post by TheRadioFlyer:
lewislgZ06 (08-27-2017),
Ronbo1786 (08-22-2017)
#83
Running Guns & Moonshine
#84
Intermediate
They look great cant wait to get mine. and like the other guy my girlfriend doesn't know either. when she sees them I know the first question is gonna be "how much?" but then again with everything else I just finished up I may get lucky and she might not notice
#85
Supporting Vendor
Thread Starter
Update: It looks like Hurricane Harvey has postponed the ship-date. To make up for this, I will be pre-assembling all of the headlight kits for my GP customers. I will ship out as soon as the UPS stores in my area open again.
Yes, I do:
http://shop.radioflyerinnovations.co...for-C5-091.htm
http://shop.radioflyerinnovations.co...for-C5-091.htm
#87
Supporting Vendor
Thread Starter
Shipping services are still on hold due to Harvey. I'm going to go ahead and print shipping labels. Those of you with UPS will get automatic updates on your shipment when the trucks start running again.
Also I've finished the installation guide. You can download it here:
radioflyerinnovations.com/uploads/Luminator_Installation_Guide.pdf
Let me know what you think.
Also I've finished the installation guide. You can download it here:
radioflyerinnovations.com/uploads/Luminator_Installation_Guide.pdf
Let me know what you think.
#90
Supporting Vendor
Thread Starter
#93
Shipping services are still on hold due to Harvey. I'm going to go ahead and print shipping labels. Those of you with UPS will get automatic updates on your shipment when the trucks start running again.
Also I've finished the installation guide. You can download it here:
radioflyerinnovations.com/uploads/Luminator_Installation_Guide.pdf
Let me know what you think.
Also I've finished the installation guide. You can download it here:
radioflyerinnovations.com/uploads/Luminator_Installation_Guide.pdf
Let me know what you think.
I cant wait to get mine!! The wait has been killing me!!!!!
#94
Thank god I paid for these before my car went under the knife. I've got a new Monster clutch going in (to include the hydraulic kit from Tick, ie bleeder, slave, master etc), a trans being rebuilt by Tick Performance, along with the torque tube bearings, diff seal, rear main seal, all getting replaced. Fingers crossed is done by next week; dropped it off last Monday.
Then I can install these headlights and it'll be like a brand new car! Well...minus the CF front lip i cracked when dropping off the car. Ugh.
Still though, thank you for all your hard work and persistence and thank goodness you're not heavily affected by the storm.
Then I can install these headlights and it'll be like a brand new car! Well...minus the CF front lip i cracked when dropping off the car. Ugh.
Still though, thank you for all your hard work and persistence and thank goodness you're not heavily affected by the storm.
#95
Drifting
I got a UPS tracking number today, but it is hard to use. I assume that it is from George but UPS tells me only that a label has been printed, but not where. George, if it's not too much, could you please post when UPS has picked up the GP items for delivery?
#96
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,970
Received 3,930 Likes
on
2,015 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
Once the package is picked up and scanned, the status will update.
Once the package reaches it's origin facility and is scanned, an update will post a scheduled delivery date, and you can begin tracking it's progress.
#97
I apparently missed the boat on these, but I'm able to still purchase them on your website. Are you taking orders for a second batch or no? I might have to wait a couple weeks to purchase.
#98
Drifting
Montgomery, Texas, where George is located, is not far from Houston. I'm guessing that he got 20+ inches of rain, so here's hoping that he, his home and his family are OK.
#99
#100
Supporting Vendor
Thread Starter
Update: All remaining 15 original orders are packed/labeled and will be dropped off at UPS store in the morning. UPS Trucks are now rolling!!!