Help C1214 H
Thread Starter
Advanced
Joined: Apr 2017
Posts: 56
Likes: 1
Help C1214 H
Everything has been good on my 01. I changed out all swaybar endlinks cause they were worn. Took it for a test drive all was good. Took the wife to dinner was all good. Came out of the restaurant started it up and have the messages and code. Code doesn't clear. If I had bumped a wheel sensor would it cause this or coincidence?
thanks
thanks
Last edited by Genecarroll; Jun 10, 2017 at 09:42 AM.
Racer
Joined: Oct 2014
Posts: 292
Likes: 12
From: miami fl
Everything has been good on my 01. I changed out all swaybar endlinks cause they were worn. Took it for a test drive all was good. Took the wife to dinner was all good. Came out of the restaurant started it up and have the messages and code. Code doesn't clear. If I had bumped a wheel sensor would it cause this or coincidence?
thanks
thanks
Thread Starter
Advanced
Joined: Apr 2017
Posts: 56
Likes: 1
Update. Since the code wasn't resetting with dic i disconnected the battery overnight. When I hooked it back up code was gone everything worked as it should been driving it on and off for a week all was good. When I started it last night after being out it was back. It did reset with dic this time. Code never seems to appear when driving only on start up. I don't mind sending it out for repair just prefer to know that's what it is and not some underlying cause. I've only had this car for about 4months so don't really know the history accept it appears to be well cared for.
