New Toy Installed
The following users liked this post:
MSgtrock (07-04-2017)
The following users liked this post:
moncal90 (07-05-2017)
#3
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,941
Received 19,293 Likes
on
13,966 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Sweet addition to your garage.
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
#8
Team Owner
Member Since: May 2000
Location: Plantation Florida USAF(Retired) 1966-1990
Posts: 47,886
Received 4,504 Likes
on
3,589 Posts
U.S. Air Force
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
NCM Sinkhole Donor
Sweet
The following users liked this post:
moncal90 (07-05-2017)
#9
1/4 mile/AutoX
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
The following users liked this post:
moncal90 (07-05-2017)
#13
Burning Brakes
Thread Starter
Member Since: Apr 2002
Location: Dardenne Prairie Missouri
Posts: 938
Received 285 Likes
on
159 Posts
Thanks all for the nice compliments! I've been wanting one for awhile now and finally got the garage door redone so that it lifts high enough so I can fit the lift in. I already changed out the oil in the Vette this weekend. Omg so much easier.
Patches.. I wouldn't have it any other way. Bolting it down is much safer and was a piece of cake.
Patches.. I wouldn't have it any other way. Bolting it down is much safer and was a piece of cake.
#15
Instructor
4 post lift
Thanks all for the nice compliments! I've been wanting one for awhile now and finally got the garage door redone so that it lifts high enough so I can fit the lift in. I already changed out the oil in the Vette this weekend. Omg so much easier.
Patches.. I wouldn't have it any other way. Bolting it down is much safer and was a piece of cake.
Patches.. I wouldn't have it any other way. Bolting it down is much safer and was a piece of cake.
#16
Burning Brakes
Thread Starter
Member Since: Apr 2002
Location: Dardenne Prairie Missouri
Posts: 938
Received 285 Likes
on
159 Posts
DN69427.. I went with the Bendpak HD-9 220V... my ceiling height is 128" and I had the garage door redone so it lifts to where it's only 4-5" off the ceiling which gives me a good 120" of room. This lift will fit in your garage with that height but you wouldn't be able to lift a car to the full height. Here's the specs of my lift...
Lifting capacity*: 9,000 lbs. / 4,082 kg
*Max capacity / front axle: 4,500 lbs. / 2,041 kg
*Max capacity / rear axle: 4,500 lbs. / 2,041 kg
Overall width: 110‐1/4” / 2,800 mm.
Outside length: 174" / 4,420 mm
Overall length: 200" / 5,080 mm
Height of columns: 88" / 2,235 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 70" / 1,778 mm
Max lifting height: 74-1/2" / 1,892 mm
Width between posts: 100‐1/4” / 2,555 mm.
Runway width: 19" / 483 mm
Width between runways: 37-1/2" - 44-3/8" / 952 - 1,127 mm
Length of runways: 164" / 4,166 mm
Min. wheelbase @ rated capacity: 115" / 2,921 mm
Min. wheelbase @ 75% capacity: 100" / 2,540 mm
Min. wheelbase @ 50% capacity: 85" / 2,159 mm
Min. wheelbase @ 25% capacity: 70" / 1,778 mm
Locking positions: 12
Lock spacing: every 4" / 102 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Lifting capacity*: 9,000 lbs. / 4,082 kg
*Max capacity / front axle: 4,500 lbs. / 2,041 kg
*Max capacity / rear axle: 4,500 lbs. / 2,041 kg
Overall width: 110‐1/4” / 2,800 mm.
Outside length: 174" / 4,420 mm
Overall length: 200" / 5,080 mm
Height of columns: 88" / 2,235 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 70" / 1,778 mm
Max lifting height: 74-1/2" / 1,892 mm
Width between posts: 100‐1/4” / 2,555 mm.
Runway width: 19" / 483 mm
Width between runways: 37-1/2" - 44-3/8" / 952 - 1,127 mm
Length of runways: 164" / 4,166 mm
Min. wheelbase @ rated capacity: 115" / 2,921 mm
Min. wheelbase @ 75% capacity: 100" / 2,540 mm
Min. wheelbase @ 50% capacity: 85" / 2,159 mm
Min. wheelbase @ 25% capacity: 70" / 1,778 mm
Locking positions: 12
Lock spacing: every 4" / 102 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph
The following users liked this post:
Mickeyrx70 (07-05-2017)
#17
Melting Slicks
Member Since: Sep 2011
Location: The beautiful Alabama Gulf Coast!!
Posts: 3,497
Received 680 Likes
on
570 Posts
Cool addition to your garage. I wish I had been farsighted enough to have designed my garage to accommodate a lift when we built our house.
Last edited by Mickeyrx70; 07-05-2017 at 01:00 PM.
#19
Instructor
DN69427.. I went with the Bendpak HD-9 220V... my ceiling height is 128" and I had the garage door redone so it lifts to where it's only 4-5" off the ceiling which gives me a good 120" of room. This lift will fit in your garage with that height but you wouldn't be able to lift a car to the full height. Here's the specs of my lift...
Lifting capacity*: 9,000 lbs. / 4,082 kg
*Max capacity / front axle: 4,500 lbs. / 2,041 kg
*Max capacity / rear axle: 4,500 lbs. / 2,041 kg
Overall width: 110‐1/4” / 2,800 mm.
Outside length: 174" / 4,420 mm
Overall length: 200" / 5,080 mm
Height of columns: 88" / 2,235 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 70" / 1,778 mm
Max lifting height: 74-1/2" / 1,892 mm
Width between posts: 100‐1/4” / 2,555 mm.
Runway width: 19" / 483 mm
Width between runways: 37-1/2" - 44-3/8" / 952 - 1,127 mm
Length of runways: 164" / 4,166 mm
Min. wheelbase @ rated capacity: 115" / 2,921 mm
Min. wheelbase @ 75% capacity: 100" / 2,540 mm
Min. wheelbase @ 50% capacity: 85" / 2,159 mm
Min. wheelbase @ 25% capacity: 70" / 1,778 mm
Locking positions: 12
Lock spacing: every 4" / 102 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Lifting capacity*: 9,000 lbs. / 4,082 kg
*Max capacity / front axle: 4,500 lbs. / 2,041 kg
*Max capacity / rear axle: 4,500 lbs. / 2,041 kg
Overall width: 110‐1/4” / 2,800 mm.
Outside length: 174" / 4,420 mm
Overall length: 200" / 5,080 mm
Height of columns: 88" / 2,235 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 70" / 1,778 mm
Max lifting height: 74-1/2" / 1,892 mm
Width between posts: 100‐1/4” / 2,555 mm.
Runway width: 19" / 483 mm
Width between runways: 37-1/2" - 44-3/8" / 952 - 1,127 mm
Length of runways: 164" / 4,166 mm
Min. wheelbase @ rated capacity: 115" / 2,921 mm
Min. wheelbase @ 75% capacity: 100" / 2,540 mm
Min. wheelbase @ 50% capacity: 85" / 2,159 mm
Min. wheelbase @ 25% capacity: 70" / 1,778 mm
Locking positions: 12
Lock spacing: every 4" / 102 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph
thank you so much for the info - I have been looking at ways to "tray" the ceiling in my garage to give me some extra head room - but happy to know I can still get one to fit.