Molding strip
#1
Advanced
Thread Starter
Molding strip
Vette was in body shop , when I got it back the thin strip where the fender screws down to the inner fender well which is held down by the screws was missing on one side. Went back to body shop and you no the answer I got. If you look down between the hood and fender gap one side you see black the other side you see paint . Strip is missing . Like to no name or part #so I can get one. thanks Joe
#2
Race Director
Member Since: May 2003
Location: Iowa
Posts: 13,997
Received 2,709 Likes
on
1,670 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16'-'17-‘18-'19-'20-'21-'22-
'23-'24
Give Marc at Vettenuts a call, he'd have one.
Contact Number:
615.896.6100 or 615.801.2711
Contact Number:
615.896.6100 or 615.801.2711
#3
Team Owner
Member Since: May 2001
Location: Virginia
Posts: 24,996
Received 1,229 Likes
on
875 Posts
St. Jude Donor '11
Vette was in body shop , when I got it back the thin strip where the fender screws down to the inner fender well which is held down by the screws was missing on one side. Went back to body shop and you no the answer I got. If you look down between the hood and fender gap one side you see black the other side you see paint . Strip is missing . Like to no name or part #so I can get one. thanks Joe
97-13 C5 Hood To Side Fender And C6 Rear Hatch Side Seal Weatherstrip
#5
Team Owner
Sounds like the body shop didn't do the work correctly. No reason why you should not get the car back with all of the body components in place.
I would go back and tell them to fix it properly. Maybe bring along some pics of another car with the molding correctly in place. No way I would have accepted the work, much less paid for it. If your insurance was paying for the work, contact them and say the work is unacceptable. Take pics of the improper repair and have the pics of the proper way it should look.
I would go back and tell them to fix it properly. Maybe bring along some pics of another car with the molding correctly in place. No way I would have accepted the work, much less paid for it. If your insurance was paying for the work, contact them and say the work is unacceptable. Take pics of the improper repair and have the pics of the proper way it should look.
#6
Team Owner
Member Since: May 2001
Location: Virginia
Posts: 24,996
Received 1,229 Likes
on
875 Posts
St. Jude Donor '11
Sounds like the body shop didn't do the work correctly. No reason why you should not get the car back with all of the body components in place.
I would go back and tell them to fix it properly. Maybe bring along some pics of another car with the molding correctly in place. No way I would have accepted the work, much less paid for it. If your insurance was paying for the work, contact them and say the work is unacceptable. Take pics of the improper repair and have the pics of the proper way it should look.
I would go back and tell them to fix it properly. Maybe bring along some pics of another car with the molding correctly in place. No way I would have accepted the work, much less paid for it. If your insurance was paying for the work, contact them and say the work is unacceptable. Take pics of the improper repair and have the pics of the proper way it should look.
#7
Advanced
Thread Starter
I left on not to good terms, like where going to call the cops. probably taking them to court. Lupi's Body Shop in Odessa Tx. . Had the car for three months for a week job. Said they had trouble matching paint. BS . So i'm fixing a couple of things they didn't line up.I ordered the molding I needed so thanks guys. Joe
The following users liked this post:
Yello95 (01-13-2018)
#8
Team Owner
Member Since: May 2001
Location: Virginia
Posts: 24,996
Received 1,229 Likes
on
875 Posts
St. Jude Donor '11
I left on not to good terms, like where going to call the cops. probably taking them to court. Lupi's Body Shop in Odessa Tx. . Had the car for three months for a week job. Said they had trouble matching paint. BS . So i'm fixing a couple of things they didn't line up.I ordered the molding I needed so thanks guys. Joe