Sliding Seat Fix Problem
Thread Starter
1st Gear
Joined: Apr 2020
Posts: 1
Likes: 0
Sliding Seat Fix Problem
First time posting and first Corvette. I have a 2000 Corvette. I did the sliding seat fix with the shims, but now my power seats go in every direction but backward. I even pulled the seat back out to make sure both rails were lined up. Any ideas on why the power seat is not moving back now? Thanks in advance.
Melting Slicks
Joined: Jul 2004
Posts: 3,294
Likes: 482
From: Brea CA
Possible bad switch assembly. Try powering the front motor in both directions bypassing the seat wire harness to make sure the motor is good. Unplug the motors from the seat harness at the black connector before applying power.
Gary
Gary
