Vibra-Technics Engine Mounts (C5/C6/GTO)
Running Guns & Moonshine
Joined: Aug 2001
Posts: 12,758
Likes: 7,350
From: CT
The issue I would face if I raised up is now the cowl but the forward angle of the firewall there as it raises up. I'll measure some time just to check. The 90* fitting off the rail is pretty low profile thankfully.
Thread Starter
Melting Slicks
Joined: Dec 2018
Posts: 2,678
Likes: 1,397
From: Orange County, CA
Wanted to give another update now that the Vibra Technics mounts have been on the car for 13 months & 2400 miles:
I really like them, still. This week I commuted 2 days (50mi/day) and I forget that the mounts are even upgraded (from a NVH standpoint). Of course I'm continuing to enjoy the better-connected feeling of them.
The car is due for an oil change so I'll make sure to visually check out the rubber and verify it's surviving.
I really like them, still. This week I commuted 2 days (50mi/day) and I forget that the mounts are even upgraded (from a NVH standpoint). Of course I'm continuing to enjoy the better-connected feeling of them.
The car is due for an oil change so I'll make sure to visually check out the rubber and verify it's surviving.
Thread Starter
Melting Slicks
Joined: Dec 2018
Posts: 2,678
Likes: 1,397
From: Orange County, CA
Got a PM from a member and thought I'd share another update on these. Now at about 3 years and 8k miles on the mounts and still enjoying them. I haven't been looking for signs of degradation but they've been fine based on feel.
