[Z06] Steering column lock problem???
Thread Starter
Advanced
Joined: Feb 2003
Posts: 77
Likes: 0
From: Douglasville GA
Steering column lock problem???
As I got in my Z this morning, I cranked it up as usual, and the info board read, "Service Column Lock" Well, I decided to try and back out of my garage and the steering wheel wouldn't turn at all! I called the dealer and they had a wrecker come pick it up. The dealer said that he thought there was a recall on the 2002 Z06 due to this problem. He said it was something to do with a switch activated when the shifter wasn't functioning properly. Anyone ever had this problem, or ever even heard of this?
Thread Starter
Advanced
Joined: Feb 2003
Posts: 77
Likes: 0
From: Douglasville GA
Re: Steering column lock problem??? (VetteCrazy02)
I'm posting again due to the lack of anyone posting. I would like to know if anyone has ever heard of this or knows what causes it. Everything is fixed now, but I would like to hear what y'all have to say. Thanks.
Team Owner
Joined: Feb 2001
Posts: 23,731
Likes: 0
From: Making my carbon footprint as BIG as possible
Cruise-In III Veteran
Cruise-In IV Veteran
St. Jude '03-'04-'05-'06
Re: Steering column lock problem??? (VetteCrazy02)
Steering Column Lock is a very well known problem. Do a search and you will find TONS of information. A lot of members install a Column Lock Bypass that disables the lock from functioning. I have one in my Z. I bought it from Corvettes of Houston. :seeya
Team Owner
Joined: Aug 2000
Posts: 67,942
Likes: 1
St. Jude Donor '12
2012 Election Contest Winner
Re: Steering column lock problem??? (VetteCrazy02)
Well, lets say about 60-70% of C5 will have CL issue.
My 99 had it 3 times.
My 99 had it 3 times.
I'm posting again due to the lack of anyone posting. I would like to know if anyone has ever heard of this or knows what causes it. Everything is fixed now, but I would like to hear what y'all have to say. Thanks.
Thread Starter
Advanced
Joined: Feb 2003
Posts: 77
Likes: 0
From: Douglasville GA
Re: Steering column lock problem??? (mmorse)
When i went to pick it up, the service department had already closed, so I didn't get to talk to the technician. But on the service sheet it said that they replaced the column lock. So I don't know any real details about it or anything. Oh well, it's fixed now. :smash:
Team Owner
Joined: Sep 2001
Posts: 28,675
Likes: 10
From: Ormond Beach FL
NCM Ambassador
CI-3-4, 9 & 10 Car Show Winner
CI-3-4-5-6-7-8-9-10 Veteran
St. Jude Donor '04-'05-'06-'07-'08-'09-'10,'14, '16
St Jude Fedex Bowl Donor '09
Re: Steering column lock problem??? (VetteCrazy02)
I had this with my 02 Z... luckily it reset itself and I could start it again... I just left it in the garage and overnighted the Column Lock Bypass from COH and Ernie installed it... now no more worries...
Instructor
Joined: Dec 2002
Posts: 101
Likes: 0
From: Staten Island New York
Re: Steering column lock problem??? (VetteCrazy02)
I got the same message in DIC "Service Column Lock" the steering wheel did not lock but when I put the car in gear (Z06 6 speed) the car stalled it happened 10 or 11 times... had car flatbedded to dealer. It went in after techs left it is stuck there until atleast Monday ...has anyone had this problem of stalling :mad
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
