When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What would be typical SAE corrected HP and Torque numbers for a stock 02 ZO6? I had some work done but did not do a base line dyno which, I feel was a stupid move on my part. Too late now.
With an '02+ car it varies from a low of around 350 to a high of low 360's for both horsepower and torque. :iagree: That is what I have seen floating around here...more in the 350's though :yesnod:
Is 370 HP, after tuning, seem realistic with Lg's, Cats, Stinger intake and B&B Bullets? Does this mean my base line was very close to 345 to 350 HP? I am very sorry I did not do a baseline.
With an '02+ car it varies from a low of around 350 to a high of low 360's for both horsepower and torque. :iagree: That is what I have seen floating around here...more in the 350's though :yesnod:
Is 370 HP, after tuning, seem realistic with Lg's, Cats, Stinger intake and B&B Bullets? Does this mean my base line was very close to 345 to 350 HP? I am very sorry I did not do a baseline.
I was at 371 with LPE LTs, stock cats and blackwing and the Borla XR-1 and was told that is even a bit low.