When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On my 03 AE vert, the passenger side visor wont stay in the forward/up position long, a few bumps and it's pointing down. Is there any way to increase the resistance of it's movement so it will stay put?
On my 03 AE vert, the passenger side visor wont stay in the forward/up position long, a few bumps and it's pointing down. Is there any way to increase the resistance of it's movement so it will stay put?
Bob
Must be something with the '03 verts, mine does the same thing. It hasn't been too bad lately so I have not tried to correct the problem.
On my 03 AE vert, the passenger side visor wont stay in the forward/up position long, a few bumps and it's pointing down. Is there any way to increase the resistance of it's movement so it will stay put?
Bob
I took mine completely off- I have tint across the top of the windshield so I didn't really need them......not to mention that I'm 6'7" and I have a lot more "seeing room" out of the windshield now.
My new o4 coupe does the same thing. It feels like there is a metal clip inside the fabric that is clamped over the rod. I have considered trying to crimp that piece using pliers, with adequate padding, but never think to try it except when I am driving & it droops.