Door Guards
Thread Starter
Burning Brakes
Joined: Sep 2003
Posts: 956
Likes: 0
From: Maryville TN
Door Guards
I bought a 98 Coupe about 2 weeks ago. I am thinking about rmoving the side molding door guards. How hard is it to do and how bad do you think it will be to clean up on a 6 year old car. It's black so I am not too worried about the paint not matching up.
Race Director
Joined: Nov 2003
Posts: 12,346
Likes: 5
From: Mustang OK
Lot's of posts here in the past on this subject. Here's a few of the more recent ones and one older one:
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
Hope these help. Good luck!
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
http://forums.corvetteforum.com/show...&highlight=BSM
Hope these help. Good luck!
Last edited by GrayC5; Oct 23, 2004 at 01:40 AM.
Administrator
Joined: Mar 2001
Posts: 368,321
Likes: 24,777
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
It can be done with a hair dryer and some fishing line. As far as how easy it will be to come off, that could vary. Some Goo Gone will remove any excess adhesive left. On an older car, it may show a difference in paint, even on black, where the moldings were.
