C5 Billet Ac Knobs
Supporting Tuner
Joined: Sep 2004
Posts: 51,896
Likes: 39
From: ================== Houston, Texas www.englandgreen.com ================== Necessary Evil™ __________
CI 6-7-8-9-10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Originally Posted by ptdrummer54
Will those go with EnglandGreen's neon licence plate surround?
Originally Posted by zilla
Now was that nice to pick on EnglandGreen that's my job
Tought Crowd..
Team Owner
Joined: Dec 2002
Posts: 26,653
Likes: 8
St. Jude Co-Organizer
St. Jude Donor '03 thru'19
Tampa Events Princess
2015 C6 of Year Finalist
I Believe In The Beer Fairy
Originally Posted by bbaarrrryy
I just wish they would make the radio ***** too
.....
Last edited by yellowvette837; Dec 16, 2004 at 03:02 PM.
Burning Brakes
Joined: Mar 2000
Posts: 799
Likes: 17
From: Rio Rancho NM
Originally Posted by LoneStarFRC
Check out www.uprproducts.com
They have billets for man HVAC on GM trucks. With some modification they can be made to work fine on C5's. Basically you have to drill the hole out slightly to get rid of the "D" shape, re-install the little spring steel "D" insert 180 degrees different from the way they come installed then epoxy it back in. Next, the the "shoulders" or "stops" on the rear of the ***** have to be narrowed a little in order to fit into the "windows" behind the *****. These determine how far right or left the ***** are allowed to turn. A drill, a Dremel, some epoxy and a little time are all that's needed. Of course once modified, the ***** are non-returnable.
I like mine. I got the ones with the blue lens inserts. They go good with my billet shifter **** and parking brake handle.
They have billets for man HVAC on GM trucks. With some modification they can be made to work fine on C5's. Basically you have to drill the hole out slightly to get rid of the "D" shape, re-install the little spring steel "D" insert 180 degrees different from the way they come installed then epoxy it back in. Next, the the "shoulders" or "stops" on the rear of the ***** have to be narrowed a little in order to fit into the "windows" behind the *****. These determine how far right or left the ***** are allowed to turn. A drill, a Dremel, some epoxy and a little time are all that's needed. Of course once modified, the ***** are non-returnable.
I like mine. I got the ones with the blue lens inserts. They go good with my billet shifter **** and parking brake handle.
Melting Slicks
Joined: Nov 2001
Posts: 3,122
Likes: 2
From: MCO
