A&A Vortech V7 YSi Supercharger kit + Dallas Performance Direct Drive
02-15-2012, 11:16 PM
#21
Supporting Vendor
Member Since: Apr 2011
Location: Frederick Maryland
Posts: 3,178
Likes: 0
Received 147 Likes
on
111 Posts
St. Jude Donor '08-'09-'10-'11-'12, '14-'15-'16-'17-'18
Just in case, I'm willing to pay out of my pocket if the OP doesn't deliver what is said in the post! Is that enough insurance to the potential buyer? 
__________________
02-16-2012, 12:42 AM
#22
ISIS SUCKS FAT CHOAD
02-16-2012, 06:13 AM
#26
Melting Slicks
Thats an awesome price for a great kit from a good seller 
Very tempting should I sell the turbo ?? I guess very soon if I don't get over 800rwhp then YSI
Good luck Bret.
Very tempting should I sell the turbo ?? I guess very soon if I don't get over 800rwhp then YSI
Good luck Bret.
02-16-2012, 08:57 AM
#27
Tech Contributor
Thread Starter
Rick, you're a good man and a good friend!!
Same for the rest of you guys! I appreciate the kind words. Certainly better than I get from the wife most of the time.
Same for the rest of you guys! I appreciate the kind words. Certainly better than I get from the wife most of the time.
02-17-2012, 07:08 PM
#28
Tech Contributor
Thread Starter
I will sell the kit for less if you don't want the direct drive.
If you don't want the 8-rib upgrade on the bracket, I can get the parts to make it a 6-rib which would include any available pulley you wish. You can run this kit on a stock motor and if you ever want the additional power, you can turn it up and retune.
Lots of options here.
If you don't want the 8-rib upgrade on the bracket, I can get the parts to make it a 6-rib which would include any available pulley you wish. You can run this kit on a stock motor and if you ever want the additional power, you can turn it up and retune.
Lots of options here.
Last edited by BLOWNBLUEZ06; 02-17-2012 at 07:11 PM.
02-18-2012, 06:18 PM
#31
Melting Slicks
Bret please let me know how much for everything + Innovators West 8-rib balancer
shipped to NY 11413.
Do I need any other part for the installation? Also what size pullies? how much did your friend see with his old setup?
I have a friend very interseted..
shipped to NY 11413.
Do I need any other part for the installation? Also what size pullies? how much did your friend see with his old setup?
I have a friend very interseted..
02-18-2012, 07:20 PM
#32
Tech Contributor
Thread Starter
I don't remember the number, but he made something in the high 800's on a 346 if I recall correctly.
I've got a few different pulleys to choose from. A 2.7", 2.85", 3.125" and 3.15" If you wanted a different size, I could help you out with getting another and give some credit on this one.
I'll send you a PM with the price with the balancer and shipping.
02-19-2012, 10:14 PM
#34
Tech Contributor
Thread Starter
I've had a few people PM me, interested in the supercharger kit without the Direct Drive system and wanting to know what it takes to set up as a 6-rib system. I'll happily sell it without the Direct Drive system at a discounted price.
It needs new pulleys, shorter spacers between the brackets and shorter bolts. To help the sale along, if you would like to get this set up as a 6-rib system, I'll pay for the conversion so that you can use this on your stock 6-rib setup. No additional cost to you.
It needs new pulleys, shorter spacers between the brackets and shorter bolts. To help the sale along, if you would like to get this set up as a 6-rib system, I'll pay for the conversion so that you can use this on your stock 6-rib setup. No additional cost to you.
Last edited by BLOWNBLUEZ06; 02-19-2012 at 10:30 PM.
02-21-2012, 11:05 AM
#36
Tech Contributor
Thread Starter
02-21-2012, 10:13 PM
#38
Tech Contributor
Thread Starter