FS: Two original gray (pewter) sport seats- needs upholstery/foam work, mid Atlantic
#1
Race Director
Thread Starter
Member Since: Dec 2002
Location: Baltimore suburbs Maryland
Posts: 10,233
Received 17 Likes
on
17 Posts
Two original gray (pewter) sport seats- needs upholstery/foam work, mid Atlantic
EDIT- SOLD
Hello, for sale are the original sport seats from my 98, one driver’s, one passenger. They need some upholstery and possible foam work - the driver’s side shows more wear than the passenger side. The seats have 205k miles and the car has sat in an attached garage the past 2.5 years. I’m a single guy so the passenger side was hardly used. I’m also lighter and shorter than your average Corvette driver- so the bolsters don’t have the typical wear. I DID NOT use the automatic entry feature where it moves the seats back/forwards every time you turn off/on the car.
Full disclosure of all details I know, I've owned the car since late 2002 - keep in mind these are 20 year old seats from a daily driven car.
Thanks for looking.
Hello, for sale are the original sport seats from my 98, one driver’s, one passenger. They need some upholstery and possible foam work - the driver’s side shows more wear than the passenger side. The seats have 205k miles and the car has sat in an attached garage the past 2.5 years. I’m a single guy so the passenger side was hardly used. I’m also lighter and shorter than your average Corvette driver- so the bolsters don’t have the typical wear. I DID NOT use the automatic entry feature where it moves the seats back/forwards every time you turn off/on the car.
Full disclosure of all details I know, I've owned the car since late 2002 - keep in mind these are 20 year old seats from a daily driven car.
- You may want to consider replacing the foam
- I did not have a problem with the bladders
- All of the motor mechanisms work (I tested the other day and took video)
- I fixed the rocking seat several years ago
- You’ll need to swap your seat belt buckles over (it’s just one nut per seat, driver’s side has electrical connector)
- The bottoms where the bolt holes are- were a little bit surface rusted (car was NOT flooded) due to leaky weather stripping. I fixed them by repainting - water never got high enough to soak the carpet or reach anything else on the seats - they are not moldy.
- The passenger control for “move forwards” feels a little tighter than the driver’s. It still works though.
Thanks for looking.
Last edited by ericdwong; 11-09-2018 at 09:31 AM. Reason: sold