Help Needed...Removing Track Assembly from Seat
Thread Starter
Racer
Joined: Aug 2004
Posts: 267
Likes: 5
From: Monmouth County NJ
Help Needed...Removing Track Assembly from Seat,,finished seat pics
I have a 2004 Z06 Seat that I am going to make into an office chair. Does anyone know the procedure before I dive in? I need to get the tracks,motors etc off the seat itself.
Any help is appreciated!!
Mark
Any help is appreciated!!
Mark
Last edited by Mluzzy1; Feb 21, 2005 at 06:23 AM.
Thread Starter
Racer
Joined: Aug 2004
Posts: 267
Likes: 5
From: Monmouth County NJ
Never mind.....found them. I loosened the hog clip on the back underside of the seat....loosened the drawstring, lifted up the bottom foam and the four 1/2" nuts were easily accessible. Liftes the seat off the track assembly and I'm ready to move onto the next step.
Tomorrow I'll make a bottom plate and go buy my base and arms.....it's gonna be sweet!!
Tomorrow I'll make a bottom plate and go buy my base and arms.....it's gonna be sweet!!
Thread Starter
Racer
Joined: Aug 2004
Posts: 267
Likes: 5
From: Monmouth County NJ
