19"/20"
Thread Starter
Intermediate
Joined: May 2005
Posts: 34
Likes: 0
From: Cologne
19"/20"
Hallo!!
I am looking for some nice 19"/20" wheels for my black C5-Convertible. Can you give me a tipp? and whats the price?? The selection in germany is not big. ...I'll be happy about some photos. (sorry, my english is not so good)
Thanks,
Andi
I am looking for some nice 19"/20" wheels for my black C5-Convertible. Can you give me a tipp? and whats the price?? The selection in germany is not big. ...I'll be happy about some photos. (sorry, my english is not so good)
Thanks,
Andi
Team Owner
Joined: Mar 1999
Posts: 28,753
Likes: 9
From: San Jose/Bear Valley CA
CA Events Coordinator
Welcome to the forum Andi!! 
Here is a link to a place that sells tire and wheel setups. There are a lot more places that sell tires and wheels but, this is a good place to look at and get some ideas on what you might like.
http://www.westcoastcorvette.com/sho...orvetteType=12
VR
Here is a link to a place that sells tire and wheel setups. There are a lot more places that sell tires and wheels but, this is a good place to look at and get some ideas on what you might like.
http://www.westcoastcorvette.com/sho...orvetteType=12
VR
Thread Starter
Intermediate
Joined: May 2005
Posts: 34
Likes: 0
From: Cologne
Hi "vetterdstr"!!
I had a look at this homepage. There are very nice wheels. Thanks!!
I'm thinking of buying the
new Iforged Classics
IForged EVO
or
GFG GF15
in 19"/20"
Can anyone help me, where I could get them for a good price?? I am from germany. If anyone has Pics, please post them.
Thanks,
Andi
I had a look at this homepage. There are very nice wheels. Thanks!!
I'm thinking of buying the
new Iforged Classics
IForged EVO
or
GFG GF15
in 19"/20"
Can anyone help me, where I could get them for a good price?? I am from germany. If anyone has Pics, please post them.
Thanks,
Andi
Burning Brakes
Joined: Nov 2004
Posts: 1,240
Likes: 55
Hi Andi,
I just had some problems with iforge with fitment and delivery issues.
Basically they didn't produce the correct offset after many conversations. The biggest problem is delivery. . .they don't!
This is only my personal opinion. If you go with iforge I wish you better luck then I had.
I just had some problems with iforge with fitment and delivery issues.
Basically they didn't produce the correct offset after many conversations. The biggest problem is delivery. . .they don't!
This is only my personal opinion. If you go with iforge I wish you better luck then I had.
Burning Brakes
Joined: Nov 2004
Posts: 1,240
Likes: 55
EFI, that's correct!
I lost all faith in them (iforge). Even if I did wait for whatever time it took I was concerned what would happen if there was an issue with the wheels after delivery. If the customer service was this bad before the sale. how would it be after?
Just my experience with them. Could be different with someone else.
I lost all faith in them (iforge). Even if I did wait for whatever time it took I was concerned what would happen if there was an issue with the wheels after delivery. If the customer service was this bad before the sale. how would it be after?
Just my experience with them. Could be different with someone else.
Melting Slicks
Joined: Nov 2003
Posts: 2,911
Likes: 2
From: Honolulu Hawaii
Originally Posted by LAYNLOW
EFI, that's correct!
I lost all faith in them (iforge). Even if I did wait for whatever time it took I was concerned what would happen if there was an issue with the wheels after delivery. If the customer service was this bad before the sale. how would it be after?
Just my experience with them. Could be different with someone else.
I lost all faith in them (iforge). Even if I did wait for whatever time it took I was concerned what would happen if there was an issue with the wheels after delivery. If the customer service was this bad before the sale. how would it be after?
Just my experience with them. Could be different with someone else.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by EFI-1
Understood. Sorry to hear you ran into problems. Let me know if you ever decide to give it another shot and I'll make sure you get squared.
Daves a pimp! Got me a sick price and great service from I-forged, ouldn't be happier.
Thanks again Dave
Race Director
Joined: Jan 2003
Posts: 10,838
Likes: 1
From: Volusia. Las Vegas FL, NV
Originally Posted by LAYNLOW
Hi Andi,
I just had some problems with iforge with fitment and delivery issues.
Basically they didn't produce the correct offset after many conversations. The biggest problem is delivery. . .they don't!
This is only my personal opinion. If you go with iforge I wish you better luck then I had.
I just had some problems with iforge with fitment and delivery issues.
Basically they didn't produce the correct offset after many conversations. The biggest problem is delivery. . .they don't!
This is only my personal opinion. If you go with iforge I wish you better luck then I had.
Andi, Where are you located in Germany? Here's a photo of the Z06 Motorsports. Shipping cost was outrageous and I think in your case, you will have to pay customs (?%) and Mwstr tax (16%).
Melting Slicks
Joined: Nov 2003
Posts: 2,911
Likes: 2
From: Honolulu Hawaii
Thanks Mike! The ride is looking awesome....I'd like to see how the Wilwoods fit in there if you ever get some upclose pics. I'm considering the Stoptech BB kit as well as the Baer's, but if you tell me you like those Wilwoods, I might be interested in looking into that as well. My new wheels are cut for big brakes.
Sports Dude, keep me posted.
Aloha, Dave
Sports Dude, keep me posted.
Aloha, Dave
Advanced
Joined: Dec 2002
Posts: 73
Likes: 0
From: St. Augustine Florida
Andi --
If You have not made up your mind already check out complete custom wheels web site www.ccwheel.com John is the best guy I have ever dealt with when it comes to custom wheels. Good Luck
If You have not made up your mind already check out complete custom wheels web site www.ccwheel.com John is the best guy I have ever dealt with when it comes to custom wheels. Good Luck
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by EFI-1
Thanks Mike! The ride is looking awesome....I'd like to see how the Wilwoods fit in there if you ever get some upclose pics. I'm considering the Stoptech BB kit as well as the Baer's, but if you tell me you like those Wilwoods, I might be interested in looking into that as well. My new wheels are cut for big brakes.
Sports Dude, keep me posted.
Aloha, Dave
Sports Dude, keep me posted.
Aloha, Dave
Melting Slicks
Joined: Dec 2001
Posts: 2,765
Likes: 0
From: Dana Point Ca
Originally Posted by Izover4u
I agree Dave took care of me with my Iforged order.. Couldn't be happier...
Thanks again Dave
Wayne
Thanks again Dave
Wayne
Thread Starter
Intermediate
Joined: May 2005
Posts: 34
Likes: 0
From: Cologne
Hi Dave!!
I'm very suprised about your offers and the comments about the other users. I believe, after the many postings from the people here, that you will be the right man for helping me in this problem.
Now my question: Can you give me an offer of the Iforged New Classics and Evolutions in 19"/20" ? How long is the delivery time? I`m very interesting of getting them the next time because I`m waiting very long to get some.
My E-Mail: andreas.servos@web.de
Thanks,
Andi
I'm very suprised about your offers and the comments about the other users. I believe, after the many postings from the people here, that you will be the right man for helping me in this problem.
Now my question: Can you give me an offer of the Iforged New Classics and Evolutions in 19"/20" ? How long is the delivery time? I`m very interesting of getting them the next time because I`m waiting very long to get some.
My E-Mail: andreas.servos@web.de
Thanks,
Andi
Melting Slicks
Joined: Nov 2003
Posts: 2,911
Likes: 2
From: Honolulu Hawaii
Andi, shoot me some mail at dave@efiunlimited.com and I'll point you in the right direction. Until I become a forum vendor, I'll keep prices to email only. I'll need the widths you're looking for as well as the finish. Wait time from iForged is approximately 4-6 weeks and they require a 50% deposit up front for construction of your custom wheels.
Aloha, Dave
Aloha, Dave
