headlight problem
Team Owner
Joined: Dec 1999
Posts: 174,312
Likes: 1,216
From: Here
Pilot of Beer Force 1
Tampa Regional Coordinator
CI 4-5-6-7-8 Veteran
Organizer St. Jude Fundraiser
I believe in the Beer Fairy
order gear from rodneydickman.com
hmmmm...the link to my tech write up goes to someone elses thread and its all F'd up....WTF
hmmmm...the link to my tech write up goes to someone elses thread and its all F'd up....WTF
Last edited by pewter99; May 17, 2005 at 11:30 AM.
Instructor
Joined: Apr 2003
Posts: 211
Likes: 3
From: Sarasota FL
Originally Posted by pewter99
order gear from rodneydickman.com
hmmmm...the link to my tech write up goes to someone elses thread and its all F'd up....WTF
hmmmm...the link to my tech write up goes to someone elses thread and its all F'd up....WTF
Rodney's product is excellent. the instructions are good. Couple of things on my 99 - there were only two 13mm bolts (not three) holding the headlight assemblies to the frame. The motor cover was held on with 6mm bolts. DO be carefull when pulling out the shaft assembly. there are a couple of white plastic spaces which can at first seem like a part of the plastic gear and there is a metal washer on the cover end.
I used the opportunity to upgrade the lighting to Sylvianna??? Silverstar bulbs and now I can finally see at night! If you were thinking of upgrading the lighting somewhat - this is the time to do it.
Whole project took a couple of hours with hand tools.
IMHO, well worth the time and money.
Andy.
