Map sensor diagram
Thread Starter
Racer
Joined: May 2005
Posts: 279
Likes: 10
Map sensor diagram
Help - I was wondering if anyone had a MAP Sensor diagram for a Z06.
Car is an 02 z06 and has code p0106, Map Sensor Fault
Im trying to check and see if the vacuum line popped off
thanks,
Jim
Car is an 02 z06 and has code p0106, Map Sensor Fault
Im trying to check and see if the vacuum line popped off
thanks,
Jim
Le Mans Master
Joined: Jul 2002
Posts: 7,370
Likes: 8
From: Slave to the evil empire
Cruise-In V Veteran
St. Jude Donor '04
The MAP sensor is on the back of the intake manifold and plugs directly into the manifold so there is no vacuum line but reach around the back side from the right side of the car and you should be able to feel the connector to make sure it did not come off. It is a very tight fit and if your hands aren't small you won't be able to get to it without pulling the intake.
Drifting
Joined: Dec 2002
Posts: 1,472
Likes: 1
From: Reynoldsburg oh
Dunno if this helps, but here is a wire diagram from a post I made.
http://forums.corvetteforum.com/show...911&forum_id=1
http://forums.corvetteforum.com/show...911&forum_id=1
