Comp Cams Rockerarms
Thread Starter
Burning Brakes
Joined: Aug 2003
Posts: 1,070
Likes: 9
From: MARRIOTTSVILLE MD
Comp Cams Rockerarms
I have seen posts that state that the Comp Cams SS 1.85 roller rockerarms will hit the valvecovers on a 2000. Do the 1.75 versions also have the same problem as well ?
Thanks >>>>> INTHERED
Thanks >>>>> INTHERED
Drifting
Joined: Nov 2001
Posts: 1,791
Likes: 0
From: NE PA
I don't know if you've actually handled them or not, but the Comp versions are big and heavy. You might want to take a look at the Crane Golds. They are noticeably lighter and will fit under your valve covers without a problem. I'm using a set of the Crane Gold Quick-Lift 1.80 roller rockers in my motor. 
Thread Starter
Burning Brakes
Joined: Aug 2003
Posts: 1,070
Likes: 9
From: MARRIOTTSVILLE MD
Originally Posted by XTrooper
I don't know if you've actually handled them or not, but the Comp versions are big and heavy. You might want to take a look at the Crane Golds. They are noticeably lighter and will fit under your valve covers without a problem. I'm using a set of the Crane Gold Quick-Lift 1.80 roller rockers in my motor.
Le Mans Master
Joined: Feb 2002
Posts: 5,970
Likes: 20
From: San Marcos Texas
but the Comp versions are big and heavy. You might want to take a look at the Crane Golds. They are noticeably lighter and will fit under your valve covers without a problem.
I have 1.65 compcams on my C4 and am putting 1.75s on my C5...
Last edited by chriswtx; Jul 11, 2005 at 08:54 PM.
