Dynatech SuperMAXX Headers + GHL Bullets.....WOW!!
Thread Starter
Advanced
Joined: Mar 2005
Posts: 69
Likes: 3
From: Advance North Carolina
Dynatech SuperMAXX Headers + GHL Bullets.....WOW!!
First of all let me thank Big John from Winston Salem and Todd (USARMYTTT) from Greensboro, NC helping me with the install on my 99 Coupe. Certainly couldn't of done it without you guys. 
Huge improvement in horsepower and torque and the sound is unbelieveable. 
I would certainly recommend this setup to anyone considerring a complete exhaust system. ALL stainless steel from the headers to the exhaust tips. Headers went in without any major problems, little time consuming, just make sure you have all the O2 wires and clutch cable out of the way. Helps to have one person helpng out from the top and another underneath the car making sure all obstacles are clear. Make sure after the headers are in place to zip tie all O2 wires clear of the header pipes, this is where we spent some extra time but well worth it IMO not to have to worry about burnt O2 wires down the road. 
Did the install this past Saturday and so far no codes. Plan on getting it dyno-tuned later this month by Carolina Auto Masters in Durham, NC. Thanks to CorvetteGarage for a great price on the Dynatech Header package. Everything is included with the Dynatech's, awesome setup from these guys, 32 inch stainless steel long tube headers, high-flow cats, and X-pipe with all accessories included. Also installed MSD 8.5 plug wires and NGK-TR55's.
Thanks to everyone on the Corvette Forum, have been a memeber for about 5 months and did a lot reading on here before I purchased any of the above. This place is addictive and has helped put a bottomless pit from my bank account directly to the vette. But I'm having a blast and no regrets so far
Huge improvement in horsepower and torque and the sound is unbelieveable. I would certainly recommend this setup to anyone considerring a complete exhaust system. ALL stainless steel from the headers to the exhaust tips. Headers went in without any major problems, little time consuming, just make sure you have all the O2 wires and clutch cable out of the way. Helps to have one person helpng out from the top and another underneath the car making sure all obstacles are clear. Make sure after the headers are in place to zip tie all O2 wires clear of the header pipes, this is where we spent some extra time but well worth it IMO not to have to worry about burnt O2 wires down the road. Did the install this past Saturday and so far no codes. Plan on getting it dyno-tuned later this month by Carolina Auto Masters in Durham, NC. Thanks to CorvetteGarage for a great price on the Dynatech Header package. Everything is included with the Dynatech's, awesome setup from these guys, 32 inch stainless steel long tube headers, high-flow cats, and X-pipe with all accessories included. Also installed MSD 8.5 plug wires and NGK-TR55's. Thanks to everyone on the Corvette Forum, have been a memeber for about 5 months and did a lot reading on here before I purchased any of the above. This place is addictive and has helped put a bottomless pit from my bank account directly to the vette. But I'm having a blast and no regrets so far
Last edited by 99vettewsnc; Aug 2, 2005 at 10:28 PM.
Safety Car
Joined: Jul 2005
Posts: 4,275
Likes: 4
From: Vancouver WA
I am thinking of using the exact same exhaust system on my 99. Just curiuos! Does the headers drop in from the top, or do you install from the bottom? I have Rhino car ramps, is that going to be high enough to install the exhaust?
Thread Starter
Advanced
Joined: Mar 2005
Posts: 69
Likes: 3
From: Advance North Carolina
Originally Posted by RED99
I am thinking of using the exact same exhaust system on my 99. Just curiuos! Does the headers drop in from the top, or do you install from the bottom? I have Rhino car ramps, is that going to be high enough to install the exhaust?
Dynatech's are a very nice header system! 
