Newbie ? gotta learn somewhere
Thread Starter
Instructor
Joined: Jun 2004
Posts: 160
Likes: 0
From: Grain Valley MO
Newbie ? gotta learn somewhere
I had a few ?'s on motors.
1st: what exactly does forged mean, is it basically stronger components in the engine, crank, rods, pistons, etc.?
2nd: what all would I have to do to a motor to hold head/cam/procharger/headers/ etc.? (besides bigger cubic inches)
Is it possible to keep my my motor at (stock displacement) 346 and add all that power and be ok?
I know these are probably easy questions, but Im not sure on everything and need to figure them out some time. Thanks, Josh
1st: what exactly does forged mean, is it basically stronger components in the engine, crank, rods, pistons, etc.?
2nd: what all would I have to do to a motor to hold head/cam/procharger/headers/ etc.? (besides bigger cubic inches)
Is it possible to keep my my motor at (stock displacement) 346 and add all that power and be ok?
I know these are probably easy questions, but Im not sure on everything and need to figure them out some time. Thanks, Josh
Last edited by 97vettec5; Aug 7, 2005 at 08:34 PM.
