Reading your Spark Plugs
Thread Starter
Le Mans Master
Joined: Feb 2001
Posts: 5,377
Likes: 85
From: Houston TX
Reading your Spark Plugs
Here's a good page on reading your Spark Plugs... this probably helps the carburetor guys out more but some of you are running modified setups.
http://www.dansmc.com/Spark_Plugs/Sp...s_catalog.html
http://www.dansmc.com/Spark_Plugs/Sp...s_catalog.html
Melting Slicks
Joined: Jul 2004
Posts: 2,507
Likes: 0
From: Wilmington Ca.
Reading spark plugs is something more practiced buy the H/P engine guys but nice to know. I just had my plugs out last week to take a look. I am running a P1SC with Kook L/T Headers. Nice to know what's going on in there.
Last edited by frank dupuy; Oct 11, 2005 at 12:52 PM.
Melting Slicks
Joined: Dec 2003
Posts: 3,315
Likes: 17
From: Near Jacksonville Fl.
Really with todays fuels there is little to be learned by reading plugs unless you add lead to the fuel.
Then you need to shut off the ing. at the end of the wot run and pull the plug to get an accurate reading.
Today you need a good wide band with data logging.
Then you need to shut off the ing. at the end of the wot run and pull the plug to get an accurate reading.
Today you need a good wide band with data logging.
