Painted Calipers: Pull brake lines or not to pull...

Reply Subscribe

Thread Tools

Search this Thread

Nov 22, 2005 | 11:30 PM

deadbolt67

Thread Starter

Racer

Joined: Nov 2005

Posts: 314

Likes: 1

From: West TN

Painted Calipers: Pull brake lines or not to pull...

Ok, I am going to paint my calipers in the next few weeks and need some input. I am considering pulling the lines when I do because it seems to me that the job would be easier in a paint booth vs. on the car (less taping, no overspray worries, better coverage, and better end result). Also, my brake fluid really needs a change and I have purchased a Motive bleeder to help complete the job. The combination of the two makes pulling the lines seem like a good choice. Also, if I do, can I reuse the brake line bolts? What type of thread lock do I need to use? Opinions / suggestions?

Many thanks in advance!!
Michael

Nov 23, 2005 | 09:06 AM

MTurnbo

Burning Brakes

Joined: Apr 2005

Posts: 1,081

Likes: 0

From: Bear Delaware

Sounds like you've made up your mind so just use some blue Loctite and yes, you can reuse the bolts.

Last edited by MTurnbo; Nov 23, 2005 at 04:53 PM.

Nov 23, 2005 | 10:08 AM

VetteDrmr

Le Mans Master

Joined: Dec 2000

Posts: 9,913

Likes: 1,868

From: Hot Springs AR

Quote:

Originally Posted by deadbolt67

Also, if I do, can I reuse the brake line bolts?

Michael,

Yes, you can, but make sure you get new copper washers for the banjo fitting.

HTH, and have a great Thanksgiving!
Mike

Nov 24, 2005 | 01:17 AM

Z06forGM

Pro

Joined: Dec 2002

Posts: 602

Likes: 0

From: Upland Ca

AND USE THE RED LOCTITE. . . . the blue has let loose in the past when it gets hot.

Nov 25, 2005 | 08:41 PM

deadbolt67

Thread Starter

Racer

Joined: Nov 2005

Posts: 314

Likes: 1

From: West TN

Thanks for the information guys! I really appreciate it.

Nov 26, 2005 | 10:28 PM

TrueBlueCoupe

Burning Brakes

Joined: Dec 1999

Posts: 815

Likes: 0

From: Richmond VA

Did mine just as you have planned. I used brake cleaner, then followed with dishwashing soap to be sure I had all the oils off the calipers.

Last edited by TrueBlueCoupe; Nov 26, 2005 at 10:31 PM.

Nov 27, 2005 | 04:17 AM

mqqn

Le Mans Master

Joined: Dec 2001

Posts: 7,788

Likes: 6

From: Winchester TN

Cruise-In III Veteran

Cruise-In IV Veteran

Cruise-In V Veteran

St. Jude Donor '03-'04-'05-'06-'07-'11

Hi deadbolt67 -

Removing them is not necessary - just additional work IMO -

here is how I did it....

http://www.iammoon.com/c5tech/caliper_painting.htm

best regards -

mqqn