ETP head users come
Burning Brakes
Joined: Nov 2004
Posts: 1,037
Likes: 0
From: Independence Missouri
St. Jude Donor '06
Yes, you will have to get those 1/2" spacers. Some say you can hog out the baffles without the spacers however, because of oil distribution, I would not recommend that at all and after talking to ET about this issue back during the winter, they agreed aswell.
Drifting
Joined: Oct 2002
Posts: 1,383
Likes: 20
From: Georgetown SC
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by ceo2858
Yes, you will have to get those 1/2" spacers. Some say you can hog out the baffles without the spacers however, because of oil distribution, I would not recommend that at all and after talking to ET about this issue back during the winter, they agreed aswell.
Joe
Burning Brakes
Joined: Nov 2004
Posts: 1,037
Likes: 0
From: Independence Missouri
St. Jude Donor '06
Your FRC's will still work unless you are using aftermarket fuel rails. Also, you will have to conted with your coil rail relocation on the driver side. I had to both fab some spacers that moved them back about an inch, plus you will have to clearance your alt bracket unless they have made changes since I purchased mine.
