MN6 swap advice
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 820
Likes: 0
From: Newport News VA
MN6 swap advice
Hello everyone. Lately my A4 has started to slip (118k and counting) and I'm seriously thinking about swapping it to a MN6. Does anyone have any advice on the install or where I could find the transmission, torque tube, and all the other parts at a reasonable price? A while back I remember hearing about some place that specializes in used C5 MN6 kits but I can't find it using the search to save my life.
Thanks!
Jeff
Thanks!
Jeff
Thread Starter
Burning Brakes
Joined: Aug 2001
Posts: 820
Likes: 0
From: Newport News VA
Originally Posted by mdhmi
It'd be a heck of a lot easier to install a built 4L60-E. The only way to keep the costs down when doing a conversion is to find someone to swap your existing parts with.
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
If you have a stock vette and are not going to heavily mod the motor a sock drive train will work fine.
If you are willing to take your vette to Indiana, maybe Rodney would hook you up. I saw that he did another one for $2,500 bucks plus the drive train (auto set-up).
Here's a link to their site.
http://www.rpmtransmissions.com/
If you are willing to take your vette to Indiana, maybe Rodney would hook you up. I saw that he did another one for $2,500 bucks plus the drive train (auto set-up).
Here's a link to their site.
http://www.rpmtransmissions.com/
