ls1/ls6 conversion to ls2 post???
Thread Starter
Race Director
Joined: Dec 2000
Posts: 14,697
Likes: 584
From: Sioux Falls SD
ls1/ls6 conversion to ls2 post???
does anyone have all the info in one thread to show how to convert from the ls1/6 motor to the ls2?? I am just needing what sensors and wiring etc need to be done.
thanks alot!
thanks alot!
Pro
Joined: Jan 2004
Posts: 675
Likes: 0
From: FT Bragg North Carolina
Are you talking about the entire motor or just the block?
If it just the block then you will need to relocate the knock sensors and use a extended harness. And the Cam position sensor is in the front so you will need to get the extended harness as well.
If its the entire motor you will need an adapter for the TB as well.
If it just the block then you will need to relocate the knock sensors and use a extended harness. And the Cam position sensor is in the front so you will need to get the extended harness as well.
If its the entire motor you will need an adapter for the TB as well.
Thread Starter
Race Director
Joined: Dec 2000
Posts: 14,697
Likes: 584
From: Sioux Falls SD
Originally Posted by msghuff
Are you talking about the entire motor or just the block?
If it just the block then you will need to relocate the knock sensors and use a extended harness. And the Cam position sensor is in the front so you will need to get the extended harness as well.
If its the entire motor you will need an adapter for the TB as well.
If it just the block then you will need to relocate the knock sensors and use a extended harness. And the Cam position sensor is in the front so you will need to get the extended harness as well.
If its the entire motor you will need an adapter for the TB as well.
well i will be reusing my ls6 intake and throttle body fuel lines etc... i is pretty much the whole shortblock but will have the heads on it already too.
any idea on where to get the extended harness??
thanks alot
Thread Starter
Race Director
Joined: Dec 2000
Posts: 14,697
Likes: 584
From: Sioux Falls SD
Originally Posted by msghuff
SDPC off to the left will get you everything you need.
excellent see my fun project here! i think this ls2 for 2700 shipped will be cheaper then redoing my motor.
http://sio.midco.net/dvandentop5/vmotor/
Thread Starter
Race Director
Joined: Dec 2000
Posts: 14,697
Likes: 584
From: Sioux Falls SD
Originally Posted by msghuff
Dang.......what happened looks like an f-body went for a swim?
cts-v actually
oh well good deal of money ahead 
just needing to get motor figured out on what i all need then i am full steam ahead on getting her on the road
