Fuel injector covers
Thanks
Racer
Joined: Sep 2006
Posts: 280
Likes: 0
Just give them a little yank and they pop right off.
They are held on by 2 clips near the top that clip over the fuel rail and 4 smaller clips along the bottom edge.
The drivers side is a little tricky sliding over the fule line but nothing really difficult.
Good luck.
They are held on by 2 clips near the top that clip over the fuel rail and 4 smaller clips along the bottom edge.
The drivers side is a little tricky sliding over the fule line but nothing really difficult.
Good luck.
Pro
Joined: Oct 2004
Posts: 538
Likes: 0
From: Edmond Ok
Originally Posted by Point & Shoot
Just give them a little yank and they pop right off.
They are held on by 2 clips near the top that clip over the fuel rail and 4 smaller clips along the bottom edge.
The drivers side is a little tricky sliding over the fule line but nothing really difficult.
Good luck.
They are held on by 2 clips near the top that clip over the fuel rail and 4 smaller clips along the bottom edge.
The drivers side is a little tricky sliding over the fule line but nothing really difficult.
Good luck.
I have a painted fuel rail cover (FRC). I wrap the fuel line with a rag and slide the frc over to keep from scratching it.
