MAF sizes and features question
muncie21?
Race Director
Joined: May 2000
Posts: 14,542
Likes: 5
Originally Posted by muncie21
In the interest of C5 science, I'm going to take the MAF apart and see if I can get a measurement on the inside.
You're the best.
Thread Starter
Melting Slicks
Joined: Mar 2005
Posts: 2,252
Likes: 181
From: NE OH
Ah, we have a winner. Thanks to both EHS and Red99 for the suggestion.
The 78mm value for the early MAFs is derived from the OD of the center piece of the MAF.
The 78mm value for the early MAFs is derived from the OD of the center piece of the MAF.
Last edited by muncie21; Oct 31, 2006 at 01:43 PM.
Race Director
Joined: May 2000
Posts: 14,542
Likes: 5
Originally Posted by muncie21
Ah, we have two winners. Thanks to both EHS and Red99 for the suggestion.
The 78mm value for the early MAFs is derived from the OD of the center piece of the MAF.
The 78mm value for the early MAFs is derived from the OD of the center piece of the MAF.
Glad it worked out.
Now on to world hunger...
Thread Starter
Melting Slicks
Joined: Mar 2005
Posts: 2,252
Likes: 181
From: NE OH
Originally Posted by EHS
There, fixed it for you.
Glad it worked out.
Now on to world hunger...
Glad it worked out.
Now on to world hunger...
BTW, for those interested, this all started when I pulled out an old descreened MAF and my DSM friend looks at it and says "Oh yea, that's 3.5" MAF" Knowing (at least at the time, thinking, I knew) it was an older 78mm one I called BS, cause 78mm doesn't == 3.5"; 78mm is actually ~3.".
Out came the calipers...and the rest is CF history.
