Z06 alignment specs
Thread Starter
Former Law Dawg Moderator
Joined: Jan 2005
Posts: 29,434
Likes: 96
From: Eads, Tennessee
CF St. Jude Co-Organizer
St. Jude Donor '05 thru '24
Z06 alignment specs
Look at my last alignment #'s and see if I should make any adjustments. The casters nor the cambers on the front equal exactly, but is it too much and should I take it back? My Z was lowered on stock bolts and I'm running 19's on the front and 20's on the rear. The tech kept stating that the difference in the front wheel caster was necessary.
Instructor
Joined: Apr 2002
Posts: 154
Likes: 0
From: Raleigh NC
RE: Alignment Specs
I would take it back to get the front camber, caster and the front/rear toe to be equal.
Your toe should also be equal from side to side, about .03 positive on each front wheel, and 0.0 for each rear.
I would set front camber at about -.6 and front caster at 6.5 for both sides.
From your final specs, my perception is that the guy was having a bad day, or was a little lazy. My car is very sensitive to alignment specs, and yours should track/handle a lot better with better attention to detail.
Your toe should also be equal from side to side, about .03 positive on each front wheel, and 0.0 for each rear.
I would set front camber at about -.6 and front caster at 6.5 for both sides.
From your final specs, my perception is that the guy was having a bad day, or was a little lazy. My car is very sensitive to alignment specs, and yours should track/handle a lot better with better attention to detail.
Safety Car
Joined: Feb 2002
Posts: 3,726
Likes: 368
From: Montoursville Pa
Originally Posted by Tact
Look at my last alignment #'s and see if I should make any adjustments. The casters nor the cambers on the front equal exactly, but is it too much and should I take it back? My Z was lowered on stock bolts and I'm running 19's on the front and 20's on the rear. The tech kept stating that the difference in the front wheel caster was necessary.
the caster is some times ofset to compensate for crowned roads (it pulls down hill) if equal also there should be a slight toe in on the rear to eliminate any possibility of toe out on braking (make it squirley if it toes out under braking)
the specs you gave are probably within the limits however you are paying to have it right not merely close! now that said it's probably why some techs don't like working on vettes (we want it right)
Thread Starter
Former Law Dawg Moderator
Joined: Jan 2005
Posts: 29,434
Likes: 96
From: Eads, Tennessee
CF St. Jude Co-Organizer
St. Jude Donor '05 thru '24
I forgot to mention that I don't race or track my car, mainly street and a little "spirited" driving. With that being said, would you still have it changed?
Thread Starter
Former Law Dawg Moderator
Joined: Jan 2005
Posts: 29,434
Likes: 96
From: Eads, Tennessee
CF St. Jude Co-Organizer
St. Jude Donor '05 thru '24
Originally Posted by ErnieN85
as said above it will probably be better if it's equal left to right
the caster is some times ofset to compensate for crowned roads (it pulls down hill) if equal also there should be a slight toe in on the rear to eliminate any possibility of toe out on braking (make it squirley if it toes out under braking)
the specs you gave are probably within the limits however you are paying to have it right not merely close! now that said it's probably why some techs don't like working on vettes (we want it right)
the caster is some times ofset to compensate for crowned roads (it pulls down hill) if equal also there should be a slight toe in on the rear to eliminate any possibility of toe out on braking (make it squirley if it toes out under braking)
the specs you gave are probably within the limits however you are paying to have it right not merely close! now that said it's probably why some techs don't like working on vettes (we want it right)
Safety Car
Joined: Feb 2002
Posts: 3,726
Likes: 368
From: Montoursville Pa
Originally Posted by Tact
I forgot to mention that I don't race or track my car, mainly street and a little "spirited" driving. With that being said, would you still have it changed?
Thread Starter
Former Law Dawg Moderator
Joined: Jan 2005
Posts: 29,434
Likes: 96
From: Eads, Tennessee
CF St. Jude Co-Organizer
St. Jude Donor '05 thru '24
If I left the settings as they are, what could I expect in regards to tire wear and handling? The car seems to handle great with no drifting left or right.
Safety Car
Joined: Feb 2002
Posts: 3,726
Likes: 368
From: Montoursville Pa
Originally Posted by Tact
If I left the settings as they are, what could I expect in regards to tire wear and handling? The car seems to handle great with no drifting left or right.
Now for me it looks like about 20-30,000 per set I'm on my third set on this car! the first two getting the alignment right lasted 20,000 this one might make 35,000
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
