Clearing codes
Melting Slicks
Joined: Sep 1999
Posts: 2,521
Likes: 0
From: Houston, TX
Re: Clearing codes (oracleguru)
Once you've got the diagnostics up and running all you need to do is push/hold the reset button.
You can acess all of the cars trouble codes from the dic and erase them! I know it works on my 99 but, I am not so sure on the earlier C5's. Here is what you do:
Press and hold options and then press Fuel 4 times while still holding the options button you must do this quickly. A message will appear saying "Diagonstics" then it will automatically read off the codes. Like....02-PCM(No codes)....03-BCM(No Codes)...ect. if there is a code it will look something like this 02-PCM (1052H) NOTICE THE H at the end of the code, That represents a code that has happened in HISTORY. If there is a C after the code it is CURRENT.
To clear the codes let it automatically cycle through the codes then it will come to (MANUAL DIAGNOSTICS) this is where you can clear codes. Use the options button to scroll forward and the TRIP to scroll backward find the code(s) to be erased like 02-PCM (2Codes). To erase this, press and hold the reset button until it says "NO CODES" There you have done it!!!. To exit the Diagonstic menu press the METRIC BUTTON!!!
-IH8PONYS
Press and hold options and then press Fuel 4 times while still holding the options button you must do this quickly. A message will appear saying "Diagonstics" then it will automatically read off the codes. Like....02-PCM(No codes)....03-BCM(No Codes)...ect. if there is a code it will look something like this 02-PCM (1052H) NOTICE THE H at the end of the code, That represents a code that has happened in HISTORY. If there is a C after the code it is CURRENT.
To clear the codes let it automatically cycle through the codes then it will come to (MANUAL DIAGNOSTICS) this is where you can clear codes. Use the options button to scroll forward and the TRIP to scroll backward find the code(s) to be erased like 02-PCM (2Codes). To erase this, press and hold the reset button until it says "NO CODES" There you have done it!!!. To exit the Diagonstic menu press the METRIC BUTTON!!!
-IH8PONYS
Thread Starter
Drifting
Joined: Oct 2000
Posts: 1,598
Likes: 1
From: Plano TX
Re: Clearing codes (sandbagger)
Nope...
Was an independent for nearly 20 years before going permanent (full time) with another tech firm. Spent 15 years doing nothing but working with Oracle implementations.
Bill
Was an independent for nearly 20 years before going permanent (full time) with another tech firm. Spent 15 years doing nothing but working with Oracle implementations.
Bill
