Heads?
Race Director
Joined: Oct 2002
Posts: 16,477
Likes: 26
From: Gone
CI 6-7-8-9-10 Veteran
St. Jude Donor '03
Hard to advise anything not knowing what you currently have, what you're looking to achieve, and your budget.
List your current mods, cam specs, etc. n/a or boost application?
List your current mods, cam specs, etc. n/a or boost application?
Thread Starter
Advanced
Joined: Jan 2007
Posts: 94
Likes: 0
From: TX
Cold air intake, Nitrous cam, stall, headers, x-pipe, no cats, and borla exhaust. I would like to add a bit more horsepower. I would like to keep the price under $1,100.00
Last edited by Sheenadianah; Jan 20, 2007 at 09:55 PM.
Team Owner
Joined: Mar 1999
Posts: 22,025
Likes: 192
From: At the beach in little Rhody
Well, with Nitrous, I would lean towards an aftermarket head because of the thicker deck but then your stated budget doesn't support it. You might be able to find a used set of Darts in your budget, which have a thicker deck than the ported stockers.
Thread Starter
Advanced
Joined: Jan 2007
Posts: 94
Likes: 0
From: TX
What good is a thicker deck goin to do but lower compression? Right now my application is just running a 150 shot on stock compression and there is no need for it to be lower. Price really isn't an issue I just threw out a number.
Melting Slicks
Joined: Oct 2006
Posts: 2,228
Likes: 5
From: Gainesville Georgia
I'm really only familiar with the AFR's, I know there are other good brands~ I just know AFR Is really good. Best of luck~ Post some pics and dyno sheets when you get them Installed
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Race Director
Joined: Sep 2005
Posts: 11,060
Likes: 290
From: Pasco WA
If your budget is only $1100, you can forget about AFR heads, even used. I think Patriot has aftermarket castings in their "budget" line, for around that amount. The thicker deck doesn't affect compression, BTW, that's determined by the volume of your combustion chambers, given in cc's. Also affecting compression with the stock shortblock is the thickness of your head gaskets.
Racer
Joined: Jan 2003
Posts: 405
Likes: 0
From: Coconut Creek FL
Patriot Performance has a very nice product that meets your budget. They start off with new GM "243" castings (original equipment on LS2 and LS6 motors) and port them on their CNC equipment. These come with stock valves (non-sodium filled) and the Patriot Gold spring package. They are new castings sold outright, so you're not getting reworked used heads, and there is no additional core charge. You can also have them milled to any cc you want at no additional cost, and they even include new TTY head bolts. I have them on my car, and I'm very pleased with the product, as well as with Patriot's customer service.
Last edited by FRC Rob; Jan 21, 2007 at 02:18 PM.
Thread Starter
Advanced
Joined: Jan 2007
Posts: 94
Likes: 0
From: TX
I guess ill correct myself, the budget really doesnt matter i just threw out a price. Ill pay whatever to get the performance im looking for.
