Catch Can question....
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 2,748
Likes: 1
From: San Jose Ca
Catch Can question....
So I installed the catch can that Willfulone and Cajundude sale.
I am having a hard time with the top cover having the nipples facing in the same direction. Is it okay to have the top cover not all the way tight?
I am having a hard time with the top cover having the nipples facing in the same direction. Is it okay to have the top cover not all the way tight?
Premium Supporting Vendor
Joined: Oct 2004
Posts: 36,838
Likes: 438
From: Manassas Park VA
St. Jude Donor '07-'08,-'13-'14, '16-'17
Exactly.
As always if you have any issues with a CCA product, you can reach me at 571 264 4282.
I guarantee I'll take care of you 100%
Peace
Chip
__________________
..................Click for
..................Click for
Burning Brakes
Joined: Nov 2006
Posts: 880
Likes: 0
From: Detroit Area Michigan
Drifting
Joined: Sep 2005
Posts: 1,258
Likes: 0
From: Home Southern Maine
St. Jude Donor '08
I snugged mine up using a cheesey rubber strap wrench, Was suprised how much they turned, also reopened to check the O ring to see if it was damaged it was not. Put it back together and snugged it up 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Drifting
Joined: Jun 2006
Posts: 1,360
Likes: 1
From: West Grove Pa
Had the same problem-a little tape and bingo, problem fixed. I don't think you'll have a problem with the leak either. Mine is on really tight and theres enough thread so it's just not going to be an issue.