iat sensor removal

Reply Subscribe

Thread Tools

Search this Thread

Mar 24, 2007 | 11:20 PM

atomsmasher

Thread Starter

5th Gear

Joined: Jan 2006

Posts: 5

Likes: 0

From: indiana

iat sensor removal

does that grommet really poke out of the hole its in? seems awfully tight, anyone took the plunge and got that out?, thanks

Mar 25, 2007 | 12:39 AM

BaneZ06

Supremacy 1 car at a time

Joined: Jul 2006

Posts: 1,683

Likes: 0

From: West Chester Pa

Just grab and pull it comes right out, on the reverse like work it back into the grommet

Mar 25, 2007 | 01:33 AM

Jim Taylor

Pro

Joined: Aug 2000

Posts: 517

Likes: 0

From: Arlington Texas

It'll wiggle out. If you're getting DTC P1111, several of us have had one of the wires break where it goes into the IAT connector. You might check it out with an ohm meter while you're there.

Mar 25, 2007 | 06:00 AM

FactoryRaceCar

Race Director

Joined: Nov 2001

Posts: 18,682

Likes: 4

St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12

Quote:

Originally Posted by ZeeOhhSixx

Just grab and pull it comes right out, on the reverse like work it back into the grommet

Mar 25, 2007 | 09:25 AM

atomsmasher

Thread Starter

5th Gear

Joined: Jan 2006

Posts: 5

Likes: 0

From: indiana

iat

ok thanks i'll try again. yep i have the famous p1111 and th e p0113, i bet that wire is cracked somewhere, in fact i am in the middle of repairing a cracked wire in the lf wheel speed sensor pigtail, other than general cleanings i dont mess with the wires, its amzing to me how they just crack inside those harnesses, i'm getting better at finding them though , this forum saved me big time, many times, thanks again

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump