When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had Tony Mamo port a FAST 90 for me over the winter. I also picked up a Nick Williams throttle body. After making every mistake that is likely possible during the installation, the car is up and running again. Fired right up, no leaks detected and throttle response seems good. Hopefully will get to take it out today if the weather cooperates
I took lots of photo's in case anyone has a question.
I had Tony Mamo port a FAST 90 for me over the winter. I also picked up a Nick Williams throttle body. After making every mistake that is likely possible during the installation, the car is up and running again. Fired right up, no leaks detected and throttle response seems good. Hopefully will get to take it out today if the weather cooperates
I took lots of photo's in case anyone has a question.
On to the tuners and we'll see what happens
Every mistake? I'll bet you didn't bust out the bottom piece of the 3 piece manifold like I did.
Every mistake? I'll bet you didn't bust out the bottom piece of the 3 piece manifold like I did.
Thought my installer was the only one who did that by not removing the valley pan bolts and installing the flat button bolts. Gave up and went back to the LS6 intake