HID headlight question.
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
HID headlight question.
I have the Corvette Garage HID kit on my Vette. I hooked it all up and everything worked like a charm. I had to send the driverside HID headlight assembly for repair. I get the headlight back today, put it in, hook up the connectors etc. The problem is this, I have had the battery dis connected for about a month or so straight. When I took the driver side headlight out, the passenger headlight motor stayed up since there wasnt the other HID connection. Once I went to trun off the HIDs they will turn off but wont close.
I dis connected the battery once again for several minutes. Hooked the battery back up and both headlights go down and close once they get power. Once the lights are on and you try and turn them off, they stay up. I can hear the motors trying to go down and see the manual ***** spin maybe half a turn and the lights stay up.
I dont think its te gears or the headlights wouldnt go up, right?? Or could the gears cause the lights to go up but not go down? And both headlight gears at the same time? There is no grinding, or any out of the ordinary noise.
I dis connected the battery once again for several minutes. Hooked the battery back up and both headlights go down and close once they get power. Once the lights are on and you try and turn them off, they stay up. I can hear the motors trying to go down and see the manual ***** spin maybe half a turn and the lights stay up.
I dont think its te gears or the headlights wouldnt go up, right?? Or could the gears cause the lights to go up but not go down? And both headlight gears at the same time? There is no grinding, or any out of the ordinary noise.
Burning Brakes
Joined: Apr 2005
Posts: 1,068
Likes: 0
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
No they dont move at all, there is no clicking or grinding. The only time the lights will go down, is if I dis connect the batery for a while, and re connect it. Once it is re connected the lights go down.
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
If they go down while the brights are on, how would I fix the problem so they wrok normally? What would cause that problem? I didnt have to do that before, I could just turn them off, and they would go down.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
Mine didnt do this either, until I sent back my driver side light since it was damaged during shipping. After I got the light back today and hooked it back up did it start doing this. Im clueless as to why it didnt do it before but now it does?
I havent had a chance to call him yet as I picked up my package after he was already closed. Im going to call him today and see what the problem might be.
I havent had a chance to call him yet as I picked up my package after he was already closed. Im going to call him today and see what the problem might be.
Burning Brakes
Joined: Apr 2005
Posts: 1,068
Likes: 0
I think our passenger side low beam bulb is not providing enough resistance to the headlight control module. Try connecting the stock bulb back and see if it'll close normally.
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
If its not providing enough resistance why would the lights go down before and not now? I dont understand why they worked normally before and now they wont cooperate.
Burning Brakes
Joined: Apr 2005
Posts: 1,068
Likes: 0
Not sure. But I had similar problems with my HID BULB kit (Not the projector kit). I had to reverse the polarity on the bulb to the connector to get it to work. And whenever the passenger side bulb it connected the lights won't go down. I tried connecting the stock bulb back on the passenger side and everything worked normal.
Thread Starter
Melting Slicks
Joined: Sep 2006
Posts: 2,041
Likes: 4
From: Rockford Illinois
I called Corvette Garage and spoke to Chris, I told him about the situation, and he couldnt give me a answer or even a clue about why its doing this. The ground for the kit is where it should be abd is good, nothing is pinched, I have good connections.
Le Mans Master
Joined: Aug 2003
Posts: 5,474
Likes: 50
From: = From Toronto = 9/11/01 FDNY 343 Never Forget
CI 6-7-8-9-10 Veteran
St. Jude Donor '08-'09-'10-'11-'13-'14
Only thing is now when I turn the lights and the car off I get a short "buzzing" sound from the dash, any ideas on this ?, only happens when shutting down.
Last edited by FFIN90; May 18, 2007 at 09:53 PM.
Le Mans Master
Joined: Aug 2003
Posts: 5,474
Likes: 50
From: = From Toronto = 9/11/01 FDNY 343 Never Forget
CI 6-7-8-9-10 Veteran
St. Jude Donor '08-'09-'10-'11-'13-'14
I just have the bulb replacement kit. Battery is fully charged and this problem still exists, lights will only go down when flipping the high beams on. Do I need to add some kind of relay or something?
Last edited by FFIN90; May 19, 2007 at 03:27 PM.
