Loose Steering?
Thread Starter
6th Gear
Joined: May 2007
Posts: 6
Likes: 0
Loose Steering?
I bought a used(or more like abused) 2000 FRC about a year and a half ago and have been in the process of fixing/ upgrading it ever since. It seemed to have loose steering what I bought it but I thought it was probably alignment or some other common problem. I am now getting around to tracking down answers and have discovered to following:
It appears to be slack in the gearbox itself. Does anyone know if the gearbox can be adjusted? If so, how is it done? If not what are my options?
- There is no play between to the steering wheel and the input shaft of the steering gearbox.
- There is no play between the tie rods and the steering gear box.
It appears to be slack in the gearbox itself. Does anyone know if the gearbox can be adjusted? If so, how is it done? If not what are my options?
Advanced
Joined: May 2005
Posts: 82
Likes: 0
my 99 frc with 111,500miles just started doing the same thing it must be in the rackI bought a used(or more like abused) 2000 FRC about a year and a half ago and have been in the process of fixing/ upgrading it ever since. It seemed to have loose steering what I bought it but I thought it was probably alignment or some other common problem. I am now getting around to tracking down answers and have discovered to following:
It appears to be slack in the gearbox itself. Does anyone know if the gearbox can be adjusted? If so, how is it done? If not what are my options?
- There is no play between to the steering wheel and the input shaft of the steering gearbox.
- There is no play between the tie rods and the steering gear box.
It appears to be slack in the gearbox itself. Does anyone know if the gearbox can be adjusted? If so, how is it done? If not what are my options?
Racer
Joined: Dec 2001
Posts: 452
Likes: 2
From: Lynnfield MA
Check this out - loose pinch bolt. Scroll about halfway down...
http://forums.corvetteforum.com/show...ght=pinch+bolt
http://forums.corvetteforum.com/show...ght=pinch+bolt
Le Mans Master
Joined: Jul 2002
Posts: 7,370
Likes: 8
From: Slave to the evil empire
Cruise-In V Veteran
St. Jude Donor '04
Check this out - loose pinch bolt. Scroll about halfway down...
http://forums.corvetteforum.com/show...ght=pinch+bolt
http://forums.corvetteforum.com/show...ght=pinch+bolt
I know you said that there is no slack between the wheel and this point but if the bolt is indeed tight then the only adjustment on the rack is to remove and replace.
Thread Starter
6th Gear
Joined: May 2007
Posts: 6
Likes: 0
I saw that post a couple days ago and immediately checked the pinch bolt and it is perfect.
The play in the steering wheel is across the entire steering range and not just the center. It feels as if the grooves of the pinion are not completely meshed with the teeth or the rack(please excuse my terminology).
I saw what looked to be the adjustment bolt on top of the rack. Here is what it looks like:
It appears very hard to get to though. I have read instuctions for adjustment on other cars and would assume its similar but we all know about assuming...
Anyone have any more thoughts about this?
The play in the steering wheel is across the entire steering range and not just the center. It feels as if the grooves of the pinion are not completely meshed with the teeth or the rack(please excuse my terminology).
I saw what looked to be the adjustment bolt on top of the rack. Here is what it looks like:
It appears very hard to get to though. I have read instuctions for adjustment on other cars and would assume its similar but we all know about assuming...
Anyone have any more thoughts about this?
Last edited by donotfeariamhere; May 14, 2007 at 08:01 PM. Reason: Typo on Pic URL
Burning Brakes
Joined: Feb 2007
Posts: 1,211
Likes: 4
From: Vancouver B.C.
If you decide that you need a new rack see this thread:
http://forums.corvetteforum.com/show....php?t=1777236
Then talk to Gene at GM partshouse who may offer you a deal on a new and improved C6 rack and you can achieve forum fame by posting your results.
http://forums.corvetteforum.com/show....php?t=1777236
Then talk to Gene at GM partshouse who may offer you a deal on a new and improved C6 rack and you can achieve forum fame by posting your results.
Melting Slicks
Joined: Feb 2006
Posts: 2,938
Likes: 62
From: Columbia SC
I have the same problem with my 00 vert with 75,000 miles about 1/8 inch of play in both directions. I am going to try the pinch bolt, but the last time I had the car at the dealer for maintenance I asked them to check it and they charged me $85.00 (tech time) to tell me it was rack lash and not adjustable.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
