help identifying these wires
Thread Starter
Pro
Joined: Mar 2005
Posts: 565
Likes: 13
From: Morris New Jersey
help identifying these wires
hey guys, my freind bought a 02 corvette that needed some work, but he took on the project. there seems to be two wires that were pulled and torn apart for some reason, and I dont know where it goes. Its two little wires encased in a black wire, and it has a yellow plastic pin conected to it, and it is located near the key hole. anyone know what this is and where it goes? someone told me that it has to do with reading the chip on the key? any help is apreciated! Thankyou!!!!
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
hey guys, my freind bought a 02 corvette that needed some work, but he took on the project. there seems to be two wires that were pulled and torn apart for some reason, and I dont know where it goes. Its two little wires encased in a black wire, and it has a yellow plastic pin conected to it, and it is located near the key hole. anyone know what this is and where it goes? someone told me that it has to do with reading the chip on the key? any help is apreciated! Thankyou!!!!
Melting Slicks
Joined: Sep 2005
Posts: 2,521
Likes: 146
From: Watertown CT
http://www.cajundude.com/ecsalky2.htm
Go here, pics 6 and 7 show the wires at the ignition. Hopefully this will help you!!
Dan
Go here, pics 6 and 7 show the wires at the ignition. Hopefully this will help you!!
Dan
Thread Starter
Pro
Joined: Mar 2005
Posts: 565
Likes: 13
From: Morris New Jersey
hey guys, dam you are all good!! its two small thin wires encased in a black sleeve... it looks a lot like the black wire on the top of picture number 5. (the picture with the guys hand in it) the car will crank over and run for a second, but then stall without these wires connected, right?
