C5 Door Panel removal
Instructor
Joined: Jun 2001
Posts: 147
Likes: 0
From: Coronado CA
Re: C5 Door Panel removal (Jerryk)
Jerryk,
C5Solutions, who market the Window Commander, has four pages of instructions with diagrams, most of which cover the removal of the door panel. I have a hard copy I downloaded. Now I can't find their site. If you have a fax you can e-mail me your number and I'll send you copies.
It's an easy procedure but the instructions are essential to avoid damage.
CarlB
C5Solutions, who market the Window Commander, has four pages of instructions with diagrams, most of which cover the removal of the door panel. I have a hard copy I downloaded. Now I can't find their site. If you have a fax you can e-mail me your number and I'll send you copies.
It's an easy procedure but the instructions are essential to avoid damage.
CarlB
Drifting
Joined: Jun 2000
Posts: 1,341
Likes: 233
From: Placitas NM
St. Jude Contributor '03 & '04
Re: C5 Door Panel removal (Jerryk)
It's not to tough.
First rol the window in the down.
Second, remove the plastic cone around the door release. There are four interal clips which you need to release. On the drivers side, insert a large flat metal screw driver at the bottom right edge between the plastic cone and the piece that has the door release in it. This take a little effort. More than I was willing to give initially. You may want to pull on the door release as you do this. After this releases, move to the clip directly above the bottom one. The last two remove fairly easily.
Next pull the cover off at the door handle and take a Torx driver to remove these screws.
Then with a door removal tool (I called it a puddy knife before it did this) insert it at the bottom of the door panel. There are 5 or 6 door clips which, when you gently pull on the door panel, give way. With a little effort they will pop out. To find the next one side the tool around the door until you locate them all.
Next lift the panel off. The first panel took me about 10 minutes. The next one took me two.
Have fun.
rr
First rol the window in the down.
Second, remove the plastic cone around the door release. There are four interal clips which you need to release. On the drivers side, insert a large flat metal screw driver at the bottom right edge between the plastic cone and the piece that has the door release in it. This take a little effort. More than I was willing to give initially. You may want to pull on the door release as you do this. After this releases, move to the clip directly above the bottom one. The last two remove fairly easily.
Next pull the cover off at the door handle and take a Torx driver to remove these screws.
Then with a door removal tool (I called it a puddy knife before it did this) insert it at the bottom of the door panel. There are 5 or 6 door clips which, when you gently pull on the door panel, give way. With a little effort they will pop out. To find the next one side the tool around the door until you locate them all.
Next lift the panel off. The first panel took me about 10 minutes. The next one took me two.
Have fun.
rr
Banned Scam/Spammer
Joined: Oct 1999
Posts: 9,121
Likes: 1
From: Southeast Va.
Re: C5 Door Panel removal (Jerryk)
2nd Gear
Joined: May 2014
Posts: 2
Likes: 0
Jerryk,
C5Solutions, who market the Window Commander, has four pages of instructions with diagrams, most of which cover the removal of the door panel. I have a hard copy I downloaded. Now I can't find their site. If you have a fax you can e-mail me your number and I'll send you copies.
It's an easy procedure but the instructions are essential to avoid damage.
CarlB
C5Solutions, who market the Window Commander, has four pages of instructions with diagrams, most of which cover the removal of the door panel. I have a hard copy I downloaded. Now I can't find their site. If you have a fax you can e-mail me your number and I'll send you copies.
It's an easy procedure but the instructions are essential to avoid damage.
CarlB
Hello, I know this is an older post, but do you still have copies of those papers to remove the door panel?
Race Director
Joined: Sep 2004
Posts: 11,874
Likes: 263
From: Arlington Va Current ride 04 vert, previous vettes: 69 vert, 77 resto mod
Race Director
Joined: Sep 2004
Posts: 11,874
Likes: 263
From: Arlington Va Current ride 04 vert, previous vettes: 69 vert, 77 resto mod
go here
https://www.corvetteforum.com/forums...e-apart-2.html
Post 35 has a you tube and Harbor Freight has the tools for prying them off
https://www.corvetteforum.com/forums...e-apart-2.html
Post 35 has a you tube and Harbor Freight has the tools for prying them off
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Race Director
Joined: Sep 2004
Posts: 11,874
Likes: 263
From: Arlington Va Current ride 04 vert, previous vettes: 69 vert, 77 resto mod
