Line lock
Race Director
Joined: Aug 1999
Posts: 15,466
Likes: 0
From: GARDENA Ca, State Of Konfusion
St. Jude Donor '05
Re: Line lock (robiferretti)
Easy as eating Pie!
Previous post: http://forums.corvetteforum.com/zerothread?id=185958
http://forums.corvetteforum.com/zerothread?id=161296
http://forums.corvetteforum.com/zerothread?id=170198
http://forums.corvetteforum.com/zerothread?id=158220
http://forums.corvetteforum.com/zerothread?id=141421
http://forums.corvetteforum.com/zerothread?id=93581
[Modified by wallstAL, 3:25 PM 12/2/2001]
Previous post: http://forums.corvetteforum.com/zerothread?id=185958
http://forums.corvetteforum.com/zerothread?id=161296
http://forums.corvetteforum.com/zerothread?id=170198
http://forums.corvetteforum.com/zerothread?id=158220
http://forums.corvetteforum.com/zerothread?id=141421
http://forums.corvetteforum.com/zerothread?id=93581
[Modified by wallstAL, 3:25 PM 12/2/2001]
Melting Slicks
Joined: Feb 2001
Posts: 3,360
Likes: 1
From: DFW TX
Senior Member
Cruise-In III Veteran
Cruise-In IV Veteran
Re: Line lock (robiferretti)
LGM is selling the Hurst Roll control with a C5 installation kit. The install of line locks aren't usually that difficult. It involves the mounting of the line lock solenoid, running a relay and the switchs, and intercepting the front brake lines off of the ABS module. Afterwards as with any time you open the brake lines you will need to bleed the brakes.
I have installed the Hurst Roll control in the past using my own wiring and bending/flaring my own brake lines - not too bad about a 2-3 hour job total. The installation kits will make it easier though.
http://www.lgmotorsports.com/catalog...mission&car=c5
