Window Issues....help please
Thread Starter
Melting Slicks
Joined: Feb 2008
Posts: 2,977
Likes: 4
From: Delmar Delaware
Window Issues....help please
I'm having an issue with my passenger window. I'm going to pull the door panel tomorrow but I was hoping to get some help and suggestions first. When I put the window down it seems like it goes slower than my driver side. When I put the window back up,there is rubbing on the door panel and it seems to lift the panel as it goes up. The window appears to seat correctly at the top. Any suggestions. I thought it might be tip in,but the correct seating at the top has me thinking otherwise.
Drifting
Joined: Jan 2005
Posts: 1,650
Likes: 2
From: Bakersfield Ca
Bump for you. I would suggest you take it to a auto glass shop and let them look at it. I suspect the window may have come loose in the track or something. Maybe they can tell you more. Good luck....
Burning Brakes
Joined: Apr 2007
Posts: 966
Likes: 9
From: Phoenix AZ
Pull the door panel. It's very easy to do (refer to this). Once you pull off the panel, it should be easy to see what's going on. The regulator/motor/window tracks are all one assembly. I had issues with my window going up and it turned out that the regulator's cables were frayed and were getting tangled up.
Intermediate
Joined: Apr 2006
Posts: 42
Likes: 0
From: Annapolis MD
I just replaced my motor/regulator assembly last weekend, and the door won't close because the window is angled too far in toward the body. I plan to adjust the window's tilt by adjusting the regulator's bottom mounting points. The front/bottom mounting point has a slotted hole, and the rear/bottom mounting point has an adjustment screw. I hope that this will work, because my window has been out of commission for a while!
