Vision Motorwoks Corvette Bezels
Thread Starter
Drifting
Joined: Apr 2008
Posts: 1,510
Likes: 15
From: Ga
Vision Motorwoks Corvette Bezels
Any one have experience with these sold by ESO Distributors, or am I the Guni Pig. They are made of ABS plastic instead of aluminum or billit. From an install perspective, it seems like a pretty good idea to avoid the glue mess.
If I am the first to purchase this product, When I get them, I will post as to the quality and install of the product.
Thanks to all,
DJR
If I am the first to purchase this product, When I get them, I will post as to the quality and install of the product.
Thanks to all,
DJR
Racer
Joined: Dec 2005
Posts: 263
Likes: 0
From: Tucson Arizona
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Racer
Joined: Dec 2005
Posts: 263
Likes: 0
From: Tucson Arizona
In the email link he sent me they were $50 off that auction site. He had nothing but good things to say about them. I'm not sure what the linking policy is to that site so do a search for C5 bezels or get a hold of Daddyrama by pm if you have any more questions.
Or... maybe he will chime in, I'm just the picture posting dude.
Or... maybe he will chime in, I'm just the picture posting dude.
Thread Starter
Drifting
Joined: Apr 2008
Posts: 1,510
Likes: 15
From: Ga
Bezles
It is against the forum rules to post where I purchased from. You can send me a PM and I will give you all the information. I can tell you that the product is awesome and the vendor has great customer service.
Thread Starter
Drifting
Joined: Apr 2008
Posts: 1,510
Likes: 15
From: Ga
It took me about 2.5 hours total. I could do it now in about 45 minutes. I was very careful and sometimes overly cautious. You have to pull apart the dash. However, it's not that difficult if you can use simple hand tools. The bezeles them selves were very easy to install. There is a site the gives detailed instructions on how to install. I will give you the link if you pm me. It is welll worth the time and effort, just be patient and you will not regret it.
