Torq Converter's

Reply Subscribe

Thread Tools

Search this Thread

Jun 11, 2008 | 03:14 PM

CATCH ME IF YOU CAN

Thread Starter

Drifting

Joined: Jun 2007

Posts: 1,425

Likes: 0

From: OKC OK

Torq Converter's

Do you need a tune after install?

Does an auto run normal (when not power braking) or wait for rpm to shift?

Harm to the auto tran.?

Your input is appreciated.

Jun 11, 2008 | 03:49 PM

98nosvette

Advanced

Joined: Oct 2007

Posts: 50

Likes: 0

From: Durant Ok

I just installed a Yank 3200 in mine about 3 months ago. I still havent gotten a tune for it, but it drives almost like stock and it doesnt hit the limiter and shifts normally. Hope this helps.

Jun 11, 2008 | 03:51 PM

CATCH ME IF YOU CAN

Thread Starter

Drifting

Joined: Jun 2007

Posts: 1,425

Likes: 0

From: OKC OK

Quote:

Originally Posted by 98nosvette

I just installed a Yank 3200 in mine about 3 months ago. I still havent gotten a tune for it, but it drives almost like stock and it doesnt hit the limiter and shifts normally. Hope this helps.

Thanks

Jun 11, 2008 | 04:06 PM

Irish Whiskey

Melting Slicks

Joined: Sep 2002

Posts: 2,329

Likes: 0

2000 coupe with Yank SS3600 installed for 4 years. Slight "sloppiness" but I do not notice it. Wife drives the car and notices no change from stock.Tune is needed - someone who can adjust shift points/pressure.
Sure is a lot of fun. Car will still roll from idle at 750 rpms.

Jun 12, 2008 | 01:19 PM

CATCH ME IF YOU CAN

Thread Starter

Drifting

Joined: Jun 2007

Posts: 1,425

Likes: 0

From: OKC OK

Quote:

Originally Posted by Irish Whiskey

Thanks

Jun 12, 2008 | 07:27 PM

verano29

Burning Brakes

Joined: Jun 2006

Posts: 933

Likes: 0

From: St. Paul MN

I just installed (or currently in the process) a yank ss3600. I'll let you know how it feels this weekend.

Jun 12, 2008 | 09:09 PM

Purerock105

Race Director

Joined: Aug 2001

Posts: 17,901

Likes: 18

From: Elko, Nevada

I did my deal(Yank SY3500/3.42's) and a TransGo shift kit as my initial install. I didn't do a dyno-tune until about 6-months later with no issues.

Jun 13, 2008 | 09:46 AM

CATCH ME IF YOU CAN

Thread Starter

Drifting

Joined: Jun 2007

Posts: 1,425

Likes: 0

From: OKC OK

Quote:

Originally Posted by verano29

I just installed (or currently in the process) a yank ss3600. I'll let you know how it feels this weekend.

Thanks

Corvette Stories

The Best of Corvette for Corvette Enthusiasts

10 Ugly Corvettes That We Still Kinda Love

Joe Kucinski

Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

Brett Foote

10 Things Every Corvette Owner Needs (2026 Edition)

Michael S. Palmer

8 Most "Only Corvette Owners Understand" Quirks and Problems

Pouria Savadkouei

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Joe Kucinski

How Much Horsepower Every Corvette Engine "LOST" in 1972

Joe Kucinski

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Michael S. Palmer

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Joe Kucinski

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Joe Kucinski

8 Coolest Corvette Pace Cars (and Replicas) of All Time

Verdad Gallardo

Jun 13, 2008 | 09:47 AM

CATCH ME IF YOU CAN

Thread Starter

Drifting

Joined: Jun 2007

Posts: 1,425

Likes: 0

From: OKC OK

Quote:

Originally Posted by Purerock105

I did my deal(Yank SY3500/3.42's) and a TransGo shift kit as my initial install. I didn't do a dyno-tune until about 6-months later with no issues.

input appreciated, thanks

Jun 13, 2008 | 07:07 PM

#10

2079

Racer

Joined: Feb 2005

Posts: 436

Likes: 1

From: Gatineau Quebec

I inslalled a 3.42 & a Yank 3200 I realy needed a tune..when the tran shifted it had the grace... of being hit whit a sleedge hammer not good , although many apparently appear to have no issues that was not my case. Put it in and you decide..

Reply Subscribe